6001-2RS Ball Bearing 12mm x 28mm x 8mm Double Sealed 180101 Deep Groove Bearings High Carbon Steel Z1 (Pack of 10)

Key Features

• Size 6001-2RS (Inner Dia.=12mm, Outer Dia.=28mm, Thickness=8mm) (Marked with 6001RS on the seals)
• Sealed on BOTH SIDES of the bearing to keep lubricant in. Suitable for complex environment
• Made from High Carbon Steel, durability and resistance to under heavy loads
• ABEC Tolerance 1 (P0), Z1 Noise Level for most general use
• Same As 6001-2RS / 180101. Pre-Lubricated, Easy to maintain

Product Description

NOTE：Please refer to the picture and select right type of bearings before your order (Sealed or Shield on BOTH or SINGLE side of the bearing). Suffix on the bearing just for differentiating between Sealed and Shield type of bearing. It would not affect the use of our product.

Description

Deep Groove Ball Bearings are one of the most widely used rolling bearings.Suitable for all kinds of industrial equipment, micro motor, small rotary motor, office equipment and so on.With small friction and high-limit speed, Deep Groove Ball Bearings are cost-effective and require little maintenance.These cost-effective bearings are widely used in areas with low requirements for hardness.Single-row, pre-lubricated, normal accuracy.Selection Guide:Shields (Designation Suffix Z/ZZ) - High speed. Protect from dirt and debris.Sealed (Designation SuffixRS/2RS) - Made of sheet steel reinforced nitrile butadiene rubber (oil- and liquid-resistant). Lower limit speed than Shield Bearings.Specification:Model: 6001-2RSSealed Type: Double SealedMaterial:High Carbon SteelHeat Treatment:QuenchingHardness: HRC50-55Cage Material: Stamping SteelInner Diameter: 12mmOuter Diameter: 28mmThickness (B): 8mmDynamic Load Rating (Cr): 5.1kNStatic Load Rating (Cor): 2.38kNAccuracy Class: P0 (ABEC-1)Noise Level: Z1Number of Pack: 10 PcsWeight:209g

Specifications