Screw Post Fit for 5/16"(8mm) Hole Dia, 10 Set Male M6x16mm, 10 Set Male M6x20mm

Key Features

• Tpye1 - Material Carbon Steel, Black Powder Coated; Under Head Size(Female) M6 x 15mm / 0.24" x 0.59"(D*L); Under Head Size(Male) M6 x 20mm / 0.24" x 0.79"(D*L); Fit Hole Diameter 8mm / 0.31"; Hex Socket Width 4mm / 0.16"; Applicable Thickness of Locked Object 23-32mm
• Type 2 - Material Carbon Steel, Zinc Plated; Under Head; Size(Female) M6 x 15mm / 0.24" x 0.59"(D*L); Under Head Size(Male) M6 x 16mm / 0.24" x 0.63"(D*L); Fit Hole Diameter 8mm / 0.31"; Hex Socket Width 4mm / 0.16"; Applicable Thickness of Locked Object 18-27mm
• Application - Fit for all kinds of DIY art, leather crafts, and clothing making. Such as thin photo albums, decorative bags, belts, leather bags, sandals, boots, etc. According to the size, it may be used as a fastener to connected.
• Installation - Make a hole within 0.5mm larger than the diameter of the female rod, put the screw and nut on both sides of the locked object, and select the appropriate tool to lock it.
• Notice - The thickness of the object which is locked, must be less than the length of the screw rod + nut rod, otherwise, it will not be able to tighten.

Product Description

About this item Tpye1 - Material: Carbon Steel, Black Powder Coated; Under Head Size(Female): M6 x 15mm / 0.24" x 0.59"(D*L); Under Head Size(Male): M6 x 20mm / 0.24" x 0.79"(D*L); Fit Hole Diameter: 8mm / 0.31"; Hex Socket Width: 4mm / 0.16"; Applicable Thickness of Locked Object: 23-32mm Type 2 - Material: Carbon Steel, Zinc Plated; Under Head; Size(Female): M6 x 15mm / 0.24" x 0.59"(D*L); Under Head Size(Male): M6 x 16mm / 0.24" x 0.63"(D*L); Fit Hole Diameter: 8mm / 0.31"; Hex Socket Width: 4mm / 0.16"; Applicable Thickness of Locked Object: 18-27mm Application - Fit for all kinds of DIY art, leather crafts, and clothing making. Such as thin photo albums, decorative bags, belts, leather bags, sandals, boots, etc. According to the size, it may be used as a fastener to connected. Installation - Make a hole within 0.5mm larger than the diameter of the female rod, put the screw and nut on both sides of the locked object, and select the appropriate tool to lock it. Notice - The thickness of the object which is locked, must be less than the length of the screw rod + nut rod, otherwise, it will not be able to tighten. ›