Metric Machine Tap M3 x 0.5mm M4 x 0.7mm H2 HSS Ti-coated 3 Straight Flutes Thread Tapping DIY Tool

Key Features

• Thread Size M3 x 0.5mm, M4 x 0.7mm. High-speed steel taps are with high hardness and toughness for wear resistance, well suited for general purpose applications.
• Can make new threads or re-thread damaged or jammed threads. Ti-coated taps provide capability, durability and long service life. Fits a wide range of applications.
• Suitable for most metals, iron plate, copper, zinc, alloy steel, abrasive steel, A3 steel, stainless steel, etc.. Appropriate addition of coolant (e.g., water) can extend the service life when tapping.
• Standard metric thread design, clear and tidy, provide rapid chip removal for efficient threading.
• The mini metric taps are mainly used for clocks, watches, low hardness wood and soft metal hole processing.

Product Description

Features

Straight 3 flutes are ground to provide rapid chip removal for efficient threading.Used with some cutting fluid or keep it wet when tapping, the will last longer.The mini metric are mainly used for clocks, watches, low hardness wood and soft metal hole processing.

Specifications

Material: HSS (High-Speed Steel), Ti-coated Total Weight: 3g ; 5gAccuracy: H2Thread Size: M3 ; M4Shank Width: 2.5mm / 0.1 inch ; 3.2mm / 0.08 inchThread Length: 10.8mm / 0.43 inch ; 12.7mm / 0.50 inchTotal Length: 50mm / 1.97 inch ; 56mm / 2.20 inchPackage Contents:1 pcs M3 x 0.5 Metric Machine Tap ; 1 pcs M4 x 0.7 Metric Machine TapTips:1. Recommended hardness of tapping material is not too high: Suitable for most metals, iron plate, copper, zinc, alloy steel, abrasive steel, A3 steel, stainless steel, etc. Appropriate addition of coolant (e.g., water) can extend the service life when tapping.2. Please control speed according to material hardness. The higher the hardness, the slower the speed. Fast speed with small torque; the slow speed with high torque. The force must be uniform in tapping operations.3. First drill the hole with a twist drill, and then use the taps tapping. The tapping angle should be vertical 90 degrees and keep stable.4. Tapping depth should not exceed 1.5 times the diameter of the tap: For example the diameter of M5x0.8 is about 5mm, and the depth should not exceed 7.5mm.

Specifications