LinkMejor PVC Pipe Glue,Strong Bonding Strength Pressure-Resistant

Professional "welders" of piping systems, bonding as strong as welding.

During pipe installation and repair, a reliable connection determines the success of the entire system. Our PVC pipe adhesive is more than just "glue." Its special formula truly integrates PVC pipes and fittings, creating a strong, permanent seal.

Instructions

1. Thoroughly clean the exterior of the pipe and the interior of the fitting with a dry cloth, ensuring the surfaces are clean and dry.

2. Before applying glue, test-insert the pipe and fitting once and mark the pipe to confirm the insertion depth and fit.

3. Using the built-in brush, apply a uniform, even coat of glue to the exterior of the pipe and interior of the fitting. Avoid applying too much or too little glue.

4. While the glue is still wet, immediately insert the pipe into the fitting to the mark and rotate it a quarter turn to ensure even distribution of the glue.

5. Hold the joint firmly for 15-30 seconds to prevent it from springing back. Wipe away any excess glue that has squeezed out of the joint. After the product has completely cured (usually 24 hours), it can be tested for water flow.

Precautions

1. Use only in a well-ventilated environment. Avoid prolonged inhalation of volatile fumes. Wearing a protective mask and gloves is recommended.

2. Store in a cool, dry place out of reach of pets. Avoid direct sunlight.

3. Close the bottle cap securely after application.