LinkMejor Knockdown Texture Sponge 2 Pack 15x15x6cm Large Paint PU Sponges

LinkMejor is dedicated to offering practical, user-friendly home repair tools for both household users and professional maintenance personnel. Our upgraded knockdown texture sponge addresses common pain points of similar products, helping you complete wall and ceiling texture repair projects efficiently.

1. 15x15x6cm larger size, suitable for both small patch work and medium area texture repair
2. Specially hole structure, designed to help better match knockdown, orange peel, popcorn and other common wall/ceiling textures
3. High-resilience porous sponge material, supports fast expansion after unpacking
4. Washable and reusable, not easy to deform under normal use
5. Suitable for both home DIY and professional maintenance scenarios

1. Tear open the vacuum package and take out the sponges
2. Soak the sponges completely in warm water (40-50℃ recommended) for 2-3 minutes
3. Gently squeeze the sponges 2-3 times in water to release trapped internal air
4. Take out the sponges, squeeze out excess water, leave for 10-20 minutes to fully expand to 15*15*6cm standard size, and use after fully air-dried

1. Clean the area to be repaired, apply primer and wait for it to dry completely
2. Apply a thin layer of joint compound/hot mud to the repair area
3. Dip the dry texture sponge lightly into the joint compound, dab evenly on the repair area to form the required texture, adjust pressing strength to control texture depth
4. Wait 15-20 minutes until the joint compound is semi-dry, use a knockdown knife to slightly smooth the raised texture to match the original wall/ceiling texture
5. After the joint compound is completely dry, sand and paint to finish the repair

• Texture effect is affected by joint compound consistency and dabbing strength, it is recommended to test on a spare board before formal use
• Please clean the sponge in time after use to avoid joint compound solidification affecting subsequent use