LinkMejor Data Logger Module Logging Shield Data Recorder Shield for Arduino UNO w/SD Card

Overview

• High-Capacity Data Logging with SD Card Slot – Built-in SD card interface allows easy data storage and logging for sensors, time tracking, and experimental projects with reliable file recording capability.
• Integrated Real Time Clock (RTC) Function – Equipped with onboard RTC chip and coin-cell battery backup to maintain accurate timekeeping even when main power is disconnected.
• Prototyping Expansion Area – Includes a dedicated prototype section for soldering custom circuits, enabling flexible development and hardware customization for various DIY electronics projects.
• Stackable Shield Design for Easy Integration – Standard shield form factor allows direct stacking with compatible development boards, simplifying wiring and reducing assembly complexity.
• Stable SPI Communication Interface – Provides reliable SPI data transfer for SD card communication, ensuring fast and stable performance for continuous data logging applications.

Features: Onboard 3.3V regulator is both a reliable reference voltage and also reliably runs SD cards that require a lot of power to run. Works with Arduino UNO, Duemilanove, Diecimila, Leonardo or ADK/Mega R3 or higher. ADK/Mega R2 or lower are not supported. Specification: Size: 68 x 53 x 23mm (approx) Regulator voltage: 3.3V Note: This project does not come with an Arduino (you need to use a shield), or an SD card. All the components of the geothermal fire are soldered and tested, but no head mounted. You need some basic soldering skills to put it together, but even if you do not have much experience you can get it done in 15 minutes. The SDA/SCL pins (next to the reset button) are not connected. If you use a board other than R3, you need to connect the A4/A5 pins to proper SDA/SCL pins manually. Document: https://learn.adafruit.com/downloads/pdf/adafruit-data-logger-shield.pdf Package Included: 1*Mini Logging Recorder Data Logger Module