LinkMejor 6902ZZ Deep Groove Ball Bearings Z2 15mm X 28mm X 7mm Double Shielded Carbon Steel 4pcs

Key Features

• 6902ZZ (I.D.=15mm, O.D.=28mm, Thickness=7mm)
• 6902-2Z bearings are Shielded on BOTH SIDES to keep lubricant in
• Made from Carbon Steel, durability and resistance to under heavy loads
• ABEC Tolerance 1 (P0), Z2 Noise Level for most general use
• Static load rating of 2259 newtons and dynamic load rating of 4321 newtons

Product Description

NOTE：Please refer to the picture and select right type of bearings before your order (Sealed or Shield on BOTH or SINGLE side of the bearing). Suffix on the bearing just for differentiating between Sealed and Shield type of bearing. It would not affect the use of our product.

Description

Single-row, pre-lubricated, normal accuracy.Deep Groove Ball Bearings are one of the most widely used rolling bearings. They are used to accommodate radial and axial loads in both directions.With small friction and high-limit speed, Ball Bearings are cost-effective and require little maintenance.Carbon Steel bearings are better in toughness than chrome steel bearings after quenching. These cost-effective bearings are widely used in areas with low requirements for Mohs hardness.Suitable for all kinds of industrial equipment, micro motor, small rotary motor, office equipment and so on. Selecting Guide:Shields (Designation Suffix Z/ZZ) - High speed. Protect from dirt and debris.Sealed (Designation Suffix RS/2RS) - Made of sheet steel reinforced nitrile butadiene rubber (oil- and liquid-resistant). Lower limit speed than Shield Bearings. Specification:Model: 6902ZZSeal Type: Double ShieldedInner Race/Outer Race Material: Carbon SteelCage Material: Stamping SteelInner Diameter (d): 15mmOuter Diameter (D): 28mmThickness (B): 7mmDynamic Load Rating (Cr): 4321NStatic Load Rating (Cor): 2259NAccuracy Class: P0 (ABEC-1)Noise Level: Z2Number of Pack: 4 Pcs

Specifications