Drill Press Spring, Quill Feed Return Coil Spring Assembly, 6Ft Long, 66 x 22 x 0.7mm

Key Features

• Expand length is 1800mm/70.87inch ; Spring OD 66mm ; Material Width 22mm ; Material Thickness 0.7mm
• Inner Mounting Type Cylindrical Bore ; Outer Mounting Type Round Hole
• This is the chrome housed spring that returns the quill to the top after you have completed drilling.Used to all kinds of vacuum cleaner coil spring, volume tube coil spring, safe coil spring and so on
• Chemical Blackening, the performance of the product form oxide film, isolate the air, prevent rust
• Pay attention to safe when installing springs. Do not loosen the wire of fixed springs!

Product Description

Specification:Material : Spring Steel (60Si2Mn)Finish : Chemical BlackeningMaterial Thickness : 0.7mm/0.03inchMaterial Width : 22mm/0.87inchSpring OD : 66mmExpand Length : 1800mm/70.87inchInner Mounting Type : Cylindrical BoreOuter Mounting Type : Round Hole Package Content :1 x Drill Press Spring Description:1.The drill press quill return spring is good replacement for many existing quill spring drill presses, this is the chrome housed spring that returns the quill to the top after you have completed drilling.Used to all kinds of vacuum cleaner coil spring, volume tube coil spring, safe coil spring and so on.2.Chemical Blackening, the performance of the product form oxide film, isolate the air, prevent rust.3.Pay attention to safe when installing springs. Do not loosen the wire of fixed springs! When installing, install the spring with a fixed wire directly into the spring , and the wire will slide out.