Door Barrel Bolt, Stainless Steel Spring Loaded Sliding Latch 2pcs

Key Features

• Type1 - Main Body Size 100 x 22 x 30mm/3.94" x 0.87" x 1.18"(L*W*H); Bolt Size 15 x 10mm/0.59" x 0.39" (Extension Length * D); Strike Plate Size 41 x 21 x 1.5mm/1.61" x 0.83" x 0.06"(L*W*T); Mounting Hole Dia. 5mm / 0.2"
• Type2 - Main Body Size 40 x 37 x 15mm/1.57" x 1.46" x 0.59" (L*W*H); Bolt Size 11 x 8mm/0.43" x 0.31" (Extension Length * D); Mounting Hole Dia. 4mm/0.16"
• Material - Constructed from stainless steel, it is sturdy and wear-resisting for dry residential daily use.
• Advantage - Comes with a reasonable interior design, do not worry about falling apart suddenly when using.
• Application - Applied to lightweight wooden doors, gate and cabinets, etc. A good replacement for replacing your old one.

Product Description

Description:1. Material - Constructed from stainless steel, it is sturdy and wear-resisting for dry residential daily use.2. Advantage - Comes with a reasonable interior design, do not worry about falling apart suddenly when using.3. Application - Applied to lightweight wooden doors, gate and cabinets, etc. A good replacement for replacing your old one.Specification:Type1:Material: Stainless SteelFinish: Vibration PolishingMain Body Size: 100 x 22 x 30mm / 3.94" x 0.87" x 1.18"(L*W*H)Bolt Size: 15 x 10mm / 0.59" x 0.39" (Extension Length * D)Strike Plate Size: 41 x 21 x 1.5mm / 1.61" x 0.83" x 0.059"(L*W*T)Mounting Hole Diameter: 5mm / 0.2"Mounting Screw Size: 4 x 20mm / 0.16" x 0.78" (Thread. Dia * L)Type2:Material: Stainless SteelFinish: Vibration PolishingMain Body Size: 40 x 37 x 15mm / 1.57" x 1.46" x 0.59" (L*W*H)Bolt Size: 11 x 8mm / 0.43" x 0.31" (Extension Length * D)Mounting Hole Diameter: 4mm / 0.16"Package Content:1 x Door Chain Bolt Lock(Each Type has 1pc, Type 2 not included screws)Installation Instruction:1. Figure out and mark where to install the door bolt(usually on inactive leaf of double door opening) and drill grooves. 2. Install the door bolt on the door leaf and tighten it with screws.3. Line up strikes on the door frame or on the floor and drill holes, then tighten with screws. 4. Close the door, insert the pin into the hole, done.