Chamfer Router Bit 45 Degree 1/2" Shank 1-3/7" Cutting Height Edge Forming Router Bit for Woodworking

Key Features

• Shank dia 1/2"; cutting height 36mm / 1-3/7"; cutting dia 75mm / 2.95"; overall length 79mm / 3.11"; cutting angle 45 degree
• Used to cut 45 degree chamfers on the workpiece, the carbide (tungsten steel) cutter bit can make smooth and clean surface. The bearing guide can be replaced.
• Suggested feed rate 8-12m/min, suggested spindle speed 18000-24000RPM. The larger the tool diameter, the smaller the spindle speed should be.
• Suitable for trimming softwood, hardwood, oak, pine boards, shaving board, plywood, MDF.
• Applicable equipment includes trimmer, hand router, table router and palm router.

Product Description

About this item Shank dia: 1/2"; cutting height: 36mm / 1-3/7"; cutting dia: 75mm / 2.95"; overall length: 79mm / 3.11"; cutting angle: 45 degree Used to cut 45 degree chamfers on the workpiece, the carbide (tungsten steel) cutter bit can make smooth and clean surface. The bearing guide can be replaced. Suggested feed rate: 8-12m/min, suggested spindle speed: 18000-24000RPM. The larger the tool diameter, the smaller the spindle speed should be. Suitable for trimming softwood, hardwood, oak, pine boards, shaving board, plywood, MDF. Applicable equipment includes trimmer, hand router, table router and palm router. ›