608-2RS Deep Groove Ball Bearing Double Rubber Sealed 180016, 8mm X 22mm X 7mm High Carbon Steel Z1 Bearings (Pack of 20)

Key Features

• Size 608-2RS (Inner Dia.=8mm, Outer Dia.=22mm, Thickness=7mm)
• Sealed on BOTH SIDES of the bearing to keep lubricant in. Suitable for complex environment
• Made from High Carbon Steel, durability and resistance to under heavy loads
• ABEC Tolerance 1 (P0), Z1 Noise Level for most general use
• Same As 608-2RS / 180016. Pre-Lubricated, Easy to maintain

Product Description

NOTE：Please refer to the picture and select right type of bearings before your order (Sealed or Shield on BOTH or SINGLE side of the bearing). Suffix on the bearing just for differentiating between Sealed and Shield type of bearing. It would not affect the use of our product.

Description

Deep Groove Ball Bearings are one of the most widely used rolling bearings. They are used to accommodate radial and axial loads in both directions.Suitable for all kinds of industrial equipment, micro motor, small rotary motor, office equipment and so on.With small friction and high-limit speed, 's Deep Groove Ball Bearings are cost-effective and require little maintenance.These cost-effective bearings are widely used in areas with low requirements for Mohs hardness.Single-row, pre-lubricated, normal accuracy. Selection Guide:Shields (Designation Suffix Z/ZZ) - High speed. Protect from dirt and debris.Sealed (Designation SuffixRS/2RS) - Made of sheet steel reinforced nitrile butadiene rubber (oil- and liquid-resistant). Lower limit speed than Shield Bearings. Specification:Model: 608-2RSSealed Type: Double SealedMaterial:High Carbon SteelHeat Treatment:QuenchingHardness: HRC50-55Cage Material: Stamping SteelInner Diameter (d): 8mmOuter Diameter (D): 22mmThickness (B): 7mmDynamic Load Rating (Cr): 3.3kNStatic Load Rating (Cor): 1.35kNAccuracy Class: P0 (ABEC-1)Noise Level: Z1Number of Pack:20 PcsWeight: 233g

Specifications