1/2" Mini Ball Valve, Brass Shut-off Valve Switch Hose Barb Pipe Tube Fittings with Clamp 90 Degree Red Operation Handle, Brass Valve, 5 Set

Key Features

• 1/2" hose barb x 1/2" hose barb ball valve (10mm). Recommended for pipe with 1/2" I.D. (1/2" or a little bit smaller).
• The ball valves are mainly used for on-off controlling or flow regulation of water, oil, and gas. Typical usage includes garden irrigation system, piping system, compressor, oil and gas supplying system, hot and cold water systems
• For all types of tubing. Wrap the thread with thread seal tape, then insert the barb into the tubing and secure it with hose clamps.
• If the barb is too large for the tubing, you can dip the tubing into boiling water. A little bit of heat would help to expand the tubing to fit perfectly. Before installing the fitting, it is necessary to shut off the fluid and relieve the pressure completely.
• Mainly made of brass, it is corrosion-resistant and high-temperature resistant. It has a 90° operating handle and a rubber coating on the outside, making it easier to operate and non-slip.

Product Description

Features

Easy Installation in tight working spaces.Connections: 1/2" Hose Barb x 1/2" Hose Barb.Used widely in piping systems and gas supplying systems.90 Degree operation handle. Red Plastic-covered lever handle for on/off manual control.

Specifications

Material: BrassColor: Brass Tone, RedHose Barb Dia: 12mm / 1/2"Handle Size: 49 x 12 mm / 1.92" x 0.47"(L x W)Stainless Steel Clamp Size: 9mm --16mm / 0.35" --0.63"Overall Size: 47mm x 16mm x 28mm / 1.85" x 0.63" x 1.1"(L*W*H)Package Contents: 5 x Shut-off Ball Valve10 x Stainless Steel Clamp