360-graders rotationsencoder kodväxling digital potentiometer 3 pin 14mm axel 10st

Key Features

• Type Encoder code with Switch; Adjustment method 360 Degree; Number of pulses 20; Pin Numbers 5(3 working signal pins & 2 mounting pins); Rated Voltage 5 Volt.
• Shaft Height 14mm/0.55"; Thread Diameter 6.7mm/0.26"; Total Dimension 15mm x 12mm x 31mm / 0.59" x 0.47" x 1.22" (L*W*H).
• In the forward rotation, the A line phase leads the B line phase; when reversed, the B line phase leads the A line phase.
• By rotating the rotary encoder can be counted in the positive direction and the reverse direction during rotation of the output pulse frequency, unlike rotary potentiometer count, this rotation counts are not limited. With the buttons on the rotary encoder can be reset to its initial state, that starts counting from 0.
• Applications Industrial control, robots, photographic lenses, computer input devices. ( CD players, for volume & on/off control or data selection through LED or LCD display.)

Product Description

Description

Ett rotations编码器, också kallat en axelencoder, är ett elektromekaniskt enhet som konverterar den vinkliga positionen eller rörelsen av en axel eller axel till digitala utgångssignaler. Rotationsencoders används i ett brett spektrum av tillämpningar som kräver övervakning eller kontroll, eller båda, av mekaniska system, inklusive industriell kontroll, roboter, fotografiska linser, datoringångsenheter.

Specifikationer

Justeringsmetod: 360 DegreeAntal pin: 5Antal siffror: 20 siffrorBetalning: 5 VoltAxelhöjd: 14mm/0.55"Trådiameter: 6.7mm/0.26"Total dimension: 15mm x 12mm x 31mm / 0.59" x 0.47" x 1.22" (L*W*H)

Notera

Avoid storing the products in a place at high temperature, high humidity and in Corrosive gases.