Risultato: Resistore di Shunt 100A 75mV per Amperometro di Corrente DC Misuratore Analogico Pannello Esterno FL-2 Divisore di Shunt

Caratteristiche Principali

• 75mV Voltage Drop and 100A Rated(Maximum) Current, 75mV satisfies most of the DC ammeter.
• Made of Copper with Anti-Rust plated, ensures the performance of stability and durability.
• External type. Two holes on both sides for a solid placing, and nuts for the circuit connection.
• 0.5% Accuracy and 120% Overload Rated Current(For 2 hours)
• Connection. A shunt needs to be placed parallel with the Ammeter(Moving Coil Galvanometer), to bypass the current. Normally, the two outside terminals were connected with the power circuit directly, and both the inside terminals placed in series with the Meter.

Descrizione del Prodotto

DC Ammeter Shunt ResistorRated Current: 100AVoltage Drop: 75mVMaterials: CopperOverload Rated Current: 120%(2 Hours)Accuracy: 0.5%Working Temp: -40C to 60C(-40F to 140F)Type: FL-2 ExternalLength: 103mmWidth: 22mmHeight: 8mmWeight: 126gApplication: An ammeter shunt allows the measurement of current values too large to be directly measured by a particular ammeter. In this case, a separate shunt, a resistor of very low but accurately known resistance, is placed in parallel with a voltmeter, so that all of the current to be measured will flow through the shunt.Package Content:1 pcs x 100A/75mV Shunt