LinkMejor CA Glue Accelerator Spray, Glue Accelerator, 100ml

This LinkMejor ca glue accelerator spray is a surface pretreatment agent specifically designed to enhance the bonding strength of adhesives. The spray form allows for quick and even coverage of the treated area. The formula evaporates rapidly, forming a very thin active layer on the surface, effectively improving the reliability of subsequent adhesive bonding. It is an ideal pretreatment tool for automotive repair, electronics assembly, model making, and industrial manufacturing.

Instructions for Use

1. Ensure the surfaces to be bonded are clean and dry.

2. In a well-ventilated area, shake well and spray a thin, even layer of ca glue accelerator from a distance of approximately 15-20 cm, ensuring complete coverage of the bonding area.

3. Allow to stand for several seconds to tens of seconds to allow the tackifier to evaporate completely. The surface should be dry completely; no wiping is necessary.

4. Apply adhesive to the treated surface as soon as possible and proceed with the bonding process.

Precautions

1. Always use in a well-ventilated area and keep away from open flames.

2. Before first use or on special materials, it is recommended to conduct a small-scale test in an inconspicuous area to confirm compatibility and effectiveness.

3. Store in a cool, dry place, away from direct sunlight.

4. Tighten the cap after use.