{"title":"Combination Drill \u0026 Taps","description":null,"products":[{"product_id":"combination-drill-and-tap-bit-set-m3-m4-m5-m6-m8-m10-with-1-4-hex-shank-bluing-h","title":"Combination Drill and Tap Bit Set M3 M4 M5 M6 M8 M10 with 1\/4\" Hex Shank Bluing High Speed Steel Countersink Bit Spiral Flute Tapping Tool 6pcs","description":"\u003cdiv class=\"product-description\"\u003e\n\u003ch2\u003eKey Features\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003eDrill and Tap Bits Bit size M3x0.5, M4x0.7, M5x0.8, M6x1, M8x1.25, M10x1.5. Can complete hole drilling, tapping, deburring and countersinking. One-step operation greatly saves processing steps and improves working efficiency.\u003c\/li\u003e\n\u003cli\u003eQuick Change 1\/4\" (6.35mm) hex shank can be used on power tools more easily and securely. The shank has a tapered end. It exceeds the tap to prevent threads damage from over-drilling.\u003c\/li\u003e\n\u003cli\u003eMaterial \u0026amp; Coating High-speed steel taps features high hardness, wear resistance and durability. Bluing process is for corrosion resistance, capability, and long service life.\u003c\/li\u003e\n\u003cli\u003eWide Applications Drill tap bits can drill or tap accurately on wood, plastic, copper, brass, aluminum, iron.(Note not work well with high hardness metal.) Self-centering point, do not need assistant center drilling or center punching.\u003c\/li\u003e\n\u003cli\u003eEasy to Use Suitable for most hand electric drills, cordless drills, impact drills and other tap machine. Drill tap bits are engraved with accurate sizes for easy identification.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003eProduct Description\u003c\/h2\u003e\n\u003ch3\u003eSpecifications\u003c\/h3\u003e\n\u003cp\u003eBit Size: M3 x 0.5, M4 x 0.7, M5 x 0.8, M6 x 1, M8 x 1.25, M10 x 1.5Hex Shank Size: 1\/4\" (6.35mm)Flute Length: 19mm \/ 0.75\", 21mm \/ 0.83\", 24mm \/ 0.94\", 26mm \/ 1.02\", 32mm \/ 1.26\", 34mm \/ 1.34\"Overall Length: 66mm \/ 2.6\", 67mm \/ 2.64\", 67.5mm \/ 2.66\", 68mm \/ 2.68\", 69mm \/ 2.72\", 70.5mm \/ 2.78\"Material: High-speed Steel 4341Surface Treatment: BluingColor: Blue\u003c\/p\u003e\n\u003ch3\u003eDescriptions\u003c\/h3\u003e\n\u003col\u003e\n\u003cli\u003eCombination drill and tap bit set can complete hole drilling, tapping, deburring and countersinking. One-step operation greatly saves processing steps and improves working efficiency.2. Quick Change 1\/4 inch hex shank can be used on power tools more easily and securely. The shank has a tapered end. It exceeds the tap to prevent threads damage from over-drilling.3. High-speed steel taps features high hardness, wear resistance and durability. Bluing process is for corrosion resistance, capability, and long service life.4. Drill tap bits can drill or tap accurately on wood, plastic, copper, brass, aluminum, iron. Self-centering point, do not need assistant center drilling or center punching.5. Suitable for most hand electric drills, cordless drills, impact drills and other tap machine.\u003c\/li\u003e\n\u003c\/ol\u003e\n\u003ch3\u003eNote\u003c\/h3\u003e\n\u003cp\u003enot work well with high hardness metal. Drill tap bits are engraved with accurate sizes for easy identification.Package Included:6pcs x Combination Drill and Tap Bits\u003c\/p\u003e\n\u003c\/div\u003e","brand":"LinkMejor","offers":[{"title":"Default","offer_id":55024526131572,"sku":"B091CP68FR","price":17.89,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1007\/5799\/5892\/files\/71PgUvYLpXL._AC_SL1500.jpg?v=1785031896"},{"product_id":"combination-drill-and-tap-bit-set-m3-m4-m5-m6-m8-m10-with-1-4-hex-shank-vacuum-t","title":"Combination Drill and Tap Bit Set M3 M4 M5 M6 M8 M10 with 1\/4\" Hex Shank Vacuum Titanium Coated High-speed Steel Countersink Bit Spiral Flute Tapping Tool 6pcs","description":"\u003cdiv class=\"product-description\"\u003e\n\u003ch2\u003eKey Features\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003eDrill and Tap Bits Bit size M3x0.5, M4x0.7, M5x0.8, M6x1, M8x1.25, M10x1.5. Can complete hole drilling, tapping, deburring and countersinking. One-step operation greatly saves processing steps and improves working efficiency.\u003c\/li\u003e\n\u003cli\u003eQuick Change 1\/4\" (6.35mm) hex shank can be used on power tools more easily and securely. The shank has a tapered end. It exceeds the tap to prevent threads damage from over-drilling.\u003c\/li\u003e\n\u003cli\u003eMaterial \u0026amp; Coating High-speed steel taps features high hardness and toughness. Vacuum titanium plating is for capability, wear-resistance, and long service life.\u003c\/li\u003e\n\u003cli\u003eWide Applications Drill tap bits can drill or tap accurately on wood, plastic, copper, brass, aluminum, iron.(Note not work well with high hardness metal.) Self-centering point, do not need assistant center drilling or center punching.\u003c\/li\u003e\n\u003cli\u003eEasy to Use Suitable for most hand electric drills, cordless drills, impact drills and other tap machine. Drill tap bits are engraved with accurate sizes for easy identification.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003eProduct Description\u003c\/h2\u003e\n\u003ch3\u003eSpecifications\u003c\/h3\u003e\n\u003cp\u003eBit Size: M3 x 0.5, M4 x 0.7, M5 x 0.8, M6 x 1, M8 x 1.25, M10 x 1.5Hex Shank Size: 1\/4\" (6.35mm)Flute Length: 19mm \/ 0.75\", 21mm \/ 0.83\", 24mm \/ 0.94\", 26mm \/ 1.02\", 32mm \/ 1.26\", 34mm \/ 1.34\"Overall Length: 66mm \/ 2.6\", 67mm \/ 2.64\", 67.5mm \/ 2.66\", 68mm \/ 2.68\", 69mm \/ 2.72\", 70.5mm \/ 2.78\"Material: High-speed Steel 4341Surface Treatment: Vacuum Titanium Coated\u003c\/p\u003e\n\u003ch3\u003eDescriptions\u003c\/h3\u003e\n\u003col\u003e\n\u003cli\u003eCombination drill and tap bit set can complete hole drilling, tapping, deburring and countersinking. One-step operation greatly saves processing steps and improves working efficiency.2. Quick Change 1\/4 inch hex shank can be used on power tools more easily and securely. The shank has a tapered end. It exceeds the tap to prevent threads damage from over-drilling.3. High-speed steel taps features high hardness and toughness. Vacuum titanium plating is for capability, wear-resistance, and long service life.4. Drill tap bits can drill or tap accurately on wood, plastic, copper, brass, aluminum, iron. Self-centering point, do not need assistant center drilling or center punching.5. Suitable for most hand electric drills, cordless drills, impact drills and other tap machine.\u003c\/li\u003e\n\u003c\/ol\u003e\n\u003ch3\u003eNote\u003c\/h3\u003e\n\u003cp\u003enot work well with high hardness metal. Drill tap bits are engraved with accurate sizes for easy identification.Package Included:6pcs x Combination Drill and Tap Bits\u003c\/p\u003e\n\u003c\/div\u003e","brand":"LinkMejor","offers":[{"title":"Default","offer_id":55024526524788,"sku":"B091CQS67D","price":17.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1007\/5799\/5892\/files\/7185_oYQBWL._AC_SL1500.jpg?v=1785031929"},{"product_id":"combination-drill-and-tap-bit-set-m3-m4-m5-m6-m8-m10-with-1-4-hex-shank-uncoated","title":"Combination Drill and Tap Bit Set M3 M4 M5 M6 M8 M10 with 1\/4\" Hex Shank Uncoated High-speed Steel Countersink Bit Spiral Flute Tapping Tool 6pcs","description":"\u003cdiv class=\"product-description\"\u003e\n\u003ch2\u003eKey Features\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003eDrill and Tap Bits Bit size M3x0.5, M4x0.7, M5x0.8, M6x1, M8x1.25, M10x1.5. Can complete hole drilling, tapping, deburring and countersinking. One-step operation greatly saves processing steps and improves working efficiency.\u003c\/li\u003e\n\u003cli\u003eQuick Change 1\/4\" (6.35mm) hex shank can be used on power tools more easily and securely. The shank has a tapered end. It exceeds the tap to prevent threads damage from over-drilling.\u003c\/li\u003e\n\u003cli\u003eMaterial \u0026amp; Coating High-speed steel taps features high hardness, wear resistance and durability. Features just the base substrate without any additional coatings, good for wide ranges of applications.\u003c\/li\u003e\n\u003cli\u003eWide Applications Drill tap bits can drill or tap accurately on wood, plastic, copper, brass, aluminum, iron.(Note not work well with high hardness metal.) Self-centering point, do not need assistant center drilling or center punching.\u003c\/li\u003e\n\u003cli\u003eEasy to Use Suitable for most hand electric drills, cordless drills, impact drills and other tap machine. Drill tap bits are engraved with accurate sizes for easy identification.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003eProduct Description\u003c\/h2\u003e\n\u003ch3\u003eSpecifications\u003c\/h3\u003e\n\u003cp\u003eBit Size: M3 x 0.5, M4 x 0.7, M5 x 0.8, M6 x 1, M8 x 1.25, M10 x 1.5Hex Shank Size: 1\/4\" (6.35mm)Flute Length: 19mm \/ 0.75\", 21mm \/ 0.83\", 24mm \/ 0.94\", 26mm \/ 1.02\", 32mm \/ 1.26\", 34mm \/ 1.34\"Overall Length: 66mm \/ 2.6\", 67mm \/ 2.64\", 67.5mm \/ 2.66\", 68mm \/ 2.68\", 69mm \/ 2.72\", 70.5mm \/ 2.78\"Material: High-speed Steel 4341Surface Treatment: UncoatedColor: Silver Tone\u003c\/p\u003e\n\u003ch3\u003eDescriptions\u003c\/h3\u003e\n\u003col\u003e\n\u003cli\u003eCombination drill and tap bit set can complete hole drilling, tapping, deburring and countersinking. One-step operation greatly saves processing steps and improves working efficiency.2. Quick Change 1\/4 inch hex shank can be used on power tools more easily and securely. The shank has a tapered end. It exceeds the tap to prevent threads damage from over-drilling.3. High-speed steel taps features high hardness, wear resistance and durability. Features just the base substrate without any additional coatings, good for wide ranges of applications.4. Drill tap bits can drill or tap accurately on wood, plastic, copper, brass, aluminum, iron. Self-centering point, do not need assistant center drilling or center punching.5. Suitable for most hand electric drills, cordless drills, impact drills and other tap machine.\u003c\/li\u003e\n\u003c\/ol\u003e\n\u003ch3\u003eNote\u003c\/h3\u003e\n\u003cp\u003enot work well with high hardness metal. Drill tap bits are engraved with accurate sizes for easy identification.Package Included:6pcs x Combination Drill and Tap Bits\u003c\/p\u003e\n\u003c\/div\u003e","brand":"LinkMejor","offers":[{"title":"Default","offer_id":55024527049076,"sku":"B091CVCJ7K","price":16.69,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1007\/5799\/5892\/files\/71eaeK7weQL._AC_SL1500.jpg?v=1785031976"},{"product_id":"combination-drill-and-tap-bit-set-6-32-8-32-10-3210-24-12-24-1-4-20-high-speed-s","title":"Combination Drill and Tap Bit Set, 6-32 8-32 10-3210-24 12-24 1\/4-20 High Speed Steel 4341 Spiral Flute Drilling Tapping Tool 1\/4\" Hex Shank 6pcs","description":"\u003cdiv class=\"product-description\"\u003e\n\u003ch2\u003eKey Features\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003eCombination Drill and Tap Bit Thread size 6-32 UNC, 8-32 UNC, 10-32 UNC, 10-24 UNC, 12-24 UNC, 1\/4-20 UNC; hex shank size 1\/4\". Combination drill and tap bit set can complete hole drilling, tapping, deburring and countersinking. One-step operation greatly saves processing steps and improves working efficiency.\u003c\/li\u003e\n\u003cli\u003eWide Applications Suitable for processing blind holes. Used for tapping aluminum, die steel, stainless steel, bronze, hard plastics, etc.. Recommended feed rate general steel 6-15m\/min; harder steel 5-10m\/min; stainless steel 2-7m\/min; cast iron 8-10m\/min.\u003c\/li\u003e\n\u003cli\u003eFeatures Self-centering point, do not need assistant center drilling or center punching. Quick change 1\/4-inch hex shank can be used on power tools more easily and securely. A tapered end on hex shank can prevent excessive tapping.\u003c\/li\u003e\n\u003cli\u003eCoating Features just the base substrate without any coatings, good for most general purpose thread tapping. High speed steel tool has high hardness and toughness, wear resistance and heat resistance.\u003c\/li\u003e\n\u003cli\u003eTips Use on drilling machines, tapping machines, CNC and milling machines. Use with tapping oil to get higher quality threads and more durable taps. Machine taps are suggested to be used with tap collets with overload protection.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003eProduct Description\u003c\/h2\u003e\n\u003ch3\u003eSpecifications\u003c\/h3\u003e\n\u003cp\u003eThread Size: 6-32 UNC, 8-32 UNC, 10-32 UNC, 10-24 UNC, 12-24 UNC, 1\/4-20 UNCHex Shank Size: 1\/4\"Drilling Length: 19mm \/ 0.75\", 19mm \/ 0.75\", 19mm \/ 0.75\", 19mm \/ 0.75\", 24mm \/ 0.94\", 22mm \/ 0.87\"Total Length: 55mm \/ 2.17\"Material: High Speed Steel 4341\u003c\/p\u003e\n\u003ch3\u003ePackage Content\u003c\/h3\u003e\n\u003cp\u003e1 Set (6pcs) x Combination Drill and Tap Bit\u003c\/p\u003e\n\u003ch3\u003eDescriptions\u003c\/h3\u003e\n\u003cp\u003eCombination drill and tap bit set can complete hole drilling, tapping, deburring and countersinking. One-step operation greatly saves processing steps and improves working efficiency.Suitable for processing holes. Used for tapping aluminum, die steel, stainless steel, bronze, hard plastics, etc.. Recommended feed rate: general steel: 6-15m\/min; harder steel: 5-10m\/min; stainless steel: 2-7m\/min; cast iron: 8-10m\/min.Self-centering point, do not need assistant center drilling or center punching. Quick change 1\/4-inch hex shank can be used on power tools more easily and securely. A tapered end on hex shank can prevent excessive tapping. It exceeds the tap to prevent thread breakage from over-drilling.High speed steel tool has high hardness and toughness, wear resistance and heat resistance. Features just the base substrate without any coatings, good for most general purpose thread tapping.Use on drilling machines, tapping machines, CNC and milling machines. Use with tapping oil to get higher quality threads and more durable taps. Machine taps are suggested to be used with tap collets with overload protection. The torque caused by too fast feed speed is too large, which can easily cause the tap to break. Taps are prone to chipping or breaking due to speed overload or non-vertical tapping.\u003c\/p\u003e\n\u003ch2\u003eSpecifications\u003c\/h2\u003e\n\u003ctable style=\"border-collapse:collapse;width:100%;max-width:600px;\"\u003e\n\u003ctr\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:8px;font-weight:bold;width:40%;\"\u003eItem Weight\u003c\/td\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:8px;\"\u003e0.01 Ounces\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/table\u003e\n\u003c\/div\u003e","brand":"LinkMejor","offers":[{"title":"Default","offer_id":55030094725492,"sku":"B0B1V28KCG","price":16.49,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1007\/5799\/5892\/files\/61GsVkN0XcL._SL1500.jpg?v=1785088324"},{"product_id":"combination-drill-and-tap-bit-set-m6-m8-m10-titanium-coated-high-speed-steel-434","title":"Combination Drill and Tap Bit Set, M6 M8 M10 Titanium Coated High Speed Steel 4341 Spiral Flute Drilling Tapping Tool 1\/4\" Hex Shank 3pcs","description":"\u003cdiv class=\"product-description\"\u003e\n\u003ch2\u003eKey Features\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003eCombination Drill and Tap Bit Thread size M6 x 1, M8 x 1.25, M10 x 1.5; hex shank size 1\/4\". Combination drill and tap bit set can complete hole drilling, tapping, deburring and countersinking. One-step operation greatly saves processing steps and improves working efficiency.\u003c\/li\u003e\n\u003cli\u003eWide Applications Suitable for processing blind holes. Used for tapping aluminum, die steel, stainless steel, bronze, hard plastics, etc.. Recommended feed rate general steel 6-15m\/min; harder steel 5-10m\/min; stainless steel 2-7m\/min; cast iron 8-10m\/min.\u003c\/li\u003e\n\u003cli\u003eFeatures Self-centering point, do not need assistant center drilling or center punching. Quick change 1\/4-inch hex shank can be used on power tools more easily and securely. A tapered end on hex shank can prevent excessive tapping.\u003c\/li\u003e\n\u003cli\u003eTitanium Coating Titanium coating provides excellent corrosion resistance, greatly improves wear resistance and hardness, and reduces the coefficient of friction. High speed steel tool has high hardness and toughness, wear resistance and heat resistance.\u003c\/li\u003e\n\u003cli\u003eTips Use on drilling machines, tapping machines, CNC and milling machines. Use with tapping oil to get higher quality threads and more durable taps. Machine taps are suggested to be used with tap collets with overload protection.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003eProduct Description\u003c\/h2\u003e\n\u003ch3\u003eSpecifications\u003c\/h3\u003e\n\u003cp\u003eThread Size: M6 x 1, M8 x 1.25, M10 x 1.5Hex Shank Size: 1\/4\"Drilling Length: 18mm \/ 0.7\", 24mm \/ 0.94\", 26mm \/ 1.02\"Total Length: 56mm \/ 2.2\"Material: High Speed Steel 4341Finish: Titanium Coated\u003c\/p\u003e\n\u003ch3\u003ePackage Content\u003c\/h3\u003e\n\u003cp\u003e1 Set (3pcs) x Combination Drill and Tap Bit\u003c\/p\u003e\n\u003ch3\u003eDescriptions\u003c\/h3\u003e\n\u003cp\u003eCombination drill and tap bit set can complete hole drilling, tapping, deburring and countersinking. One-step operation greatly saves processing steps and improves working efficiency.Suitable for processing holes. Used for tapping aluminum, die steel, stainless steel, bronze, hard plastics, etc.. Recommended feed rate: general steel: 6-15m\/min; harder steel: 5-10m\/min; stainless steel: 2-7m\/min; cast iron: 8-10m\/min.Self-centering point, do not need assistant center drilling or center punching. Quick change 1\/4-inch hex shank can be used on power tools more easily and securely. A tapered end on hex shank can prevent excessive tapping. It exceeds the tap to prevent thread breakage from over-drilling.High speed steel tool has high hardness and toughness, wear resistance and heat resistance. Titanium coating provides excellent corrosion resistance, greatly improves wear resistance and hardness, and reduces the coefficient of friction.Use on drilling machines, tapping machines, CNC and milling machines. Use with tapping oil to get higher quality threads and more durable taps. Machine taps are suggested to be used with tap collets with overload protection. The torque caused by too fast feed speed is too large, which can easily cause the tap to break. Taps are prone to chipping or breaking due to speed overload or non-vertical tapping.\u003c\/p\u003e\n\u003c\/div\u003e","brand":"LinkMejor","offers":[{"title":"Default","offer_id":55030095479156,"sku":"B0B1V47W13","price":9.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1007\/5799\/5892\/files\/61jmz977_yL._SL1500.jpg?v=1785088386"},{"product_id":"combination-drill-and-tap-bits-metric-m8-x-1-25-thread-1-4-hex-shank-tialn-coate","title":"Combination Drill and Tap Bits Metric M8 x 1.25 Thread 1\/4\" Hex Shank TiAlN Coated Threading Screw Taps 6542 High Speed Steel Machine Drilling Tapping Tool Kit","description":"\u003cdiv class=\"product-description\"\u003e\n\u003ch2\u003eKey Features\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003eCombination Drill and Tap Bit Thread size M8 x 1.25; hex shank size 1\/4\"; drilling + tapping length 25mm \/ 0.98\"; total length 54mm \/ 2.13\". Metric combination tap drill bit is used to create threaded holes, great for situations where both drilling and tapping are required. Can process both through holes and blind holes.\u003c\/li\u003e\n\u003cli\u003e3-in-1 Combination The 3-in-1 combination drill and tap bit set can complete hole drilling, tapping, and countersinking. Three processes in one, one-step operation, greatly saving processing steps, improving work efficiency, and providing accurate processing results.\u003c\/li\u003e\n\u003cli\u003eSpecial Design Self-centering point, do not need assistant center drilling or center punching. Quick change 1\/4-inch hex shank can be used on power tools more easily and securely. A tapered end on hex shank can prevent excessive tapping. It exceeds the tap to prevent thread breakage from over-drilling.\u003c\/li\u003e\n\u003cli\u003e6542 (M2) High Speed Steel The high speed steel screw taps run at high speeds and generate threads quickly and efficiently, offering high hardness, wear resistance, and good toughness. TiAlN coating provides high hardness, increased lubricity, and improved heat resistance.\u003c\/li\u003e\n\u003cli\u003eTips Works with drilling machines, tapping machines, CNC and milling machines. Use with tapping oil to get higher quality threads and more durable taps. Machine taps are suggested to be used with tap collets with overload protection. Recommended feed rate general steel 6-15m\/min; harder steel 5-10m\/min; stainless steel 2-7m\/min; cast iron 8-10m\/min.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003eProduct Description\u003c\/h2\u003e\n\u003cp\u003eThe 3-in-1 combination drill and tap bit set can complete hole drilling, tapping, and countersinking. Three processes in one, one-step operation, greatly saving processing steps, improving work efficiency, and providing accurate processing results.Metric combination tap drill bit is used to create threaded holes, great for situations where both drilling and tapping are required. Can process both through holes and blind holes. Suitable for aluminum, mould steel, stainless steel, bronze, hard plastics, etc..Self-centering point, do not need assistant center drilling or center punching. Quick change 1\/4-inch hex shank can be used on power tools more easily and securely. A tapered end on hex shank can prevent excessive tapping. It exceeds the tap to prevent thread breakage from over-drilling.6542 high speed steel screw taps run at high speeds and generate threads quickly and efficiently, offering high hardness, wear resistance, and good toughness. TiAlN coating improves drill wear resistance, corrosion resistance and high temperature stability, and prolongs service life.Works with drilling machines, tapping machines, CNC and milling machines. Use with tapping oil to get higher quality threads and more durable taps. Machine taps are suggested to be used with tap collets with overload protection.Tips: Recommended feed rate: general steel: 6-15m\/min; harder steel: 5-10m\/min; stainless steel: 2-7m\/min; cast iron: 8-10m\/min. The torque caused by too fast feed speed is too large, which can easily cause the tap to break. Taps are prone to chipping or breaking due to speed overload or non-vertical tapping.\u003c\/p\u003e\n\u003c\/div\u003e","brand":"LinkMejor","offers":[{"title":"Default","offer_id":55030603186548,"sku":"B0DDTD95CX","price":9.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1007\/5799\/5892\/files\/51OcnmOl-3L._SL1500.jpg?v=1785106461"},{"product_id":"13pcs-combination-drill-tap-bit-set-sae-6-32nc-to-1-4-20nc-metric-m3-to-m10-thre","title":"13pcs Combination Drill Tap Bit Set, SAE 6-32NC to 1\/4-20NC Metric M3 to M10 Thread Taps with Quick Change Adapter, Screw Threading Drilling Tapping Tool Kit","description":"\u003cdiv class=\"product-description\"\u003e\n\u003ch2\u003eKey Features\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003eCombination Drill and Tap Bit Thread size (SAE) 6-32NC 8-32NC 10-24NC 10-32NC 12-24NC 1\/4-20NC, (Metric) M3 x 0.5 M4 x 0.7 M5 x 0.8 M6 x 1.0 M8 x 1.25 M10 x 1.5. Can process both through holes and blind holes. Tap drill bit set includes a quick-change adapter for easy bit changes, and the sturdy plastic box is lightweight and durable for easy storage and organization.\u003c\/li\u003e\n\u003cli\u003e3-in-1 Combination The 3-in-1 combination drill and tap bit set can complete hole drilling, tapping, and countersinking. Three processes in one, one-step operation, greatly saving processing steps, improving work efficiency, and providing accurate processing results. Used to create threaded holes, great for situations where both drilling and tapping are required.\u003c\/li\u003e\n\u003cli\u003eSpecial Design Self-centering point, do not need assistant center drilling or center punching. Quick change 1\/4-inch hex shank can be used on power tools more easily and securely. A tapered end on hex shank can prevent excessive tapping. It exceeds the tap to prevent thread breakage from over-drilling.\u003c\/li\u003e\n\u003cli\u003e4341 High Speed Steel HSS4341 thread taps offer standard hardness, good wear resistance and heat resistance for general purpose threading applications, suitable for tapping softer materials or standard machining operations. Features the base substrate without any coatings, well suited for most general purpose tapping.\u003c\/li\u003e\n\u003cli\u003eTips Works with drilling machines, tapping machines, CNC and milling machines. Use with tapping oil to get higher quality threads and more durable taps. Machine taps are suggested to be used with tap collets with overload protection. Recommended feed rate general steel 6-15m\/min; harder steel 5-10m\/min; stainless steel 2-7m\/min; cast iron 8-10m\/min.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003eProduct Description\u003c\/h2\u003e\n\u003cp\u003eThread Size: (SAE) 6-32NC 8-32NC 10-24NC 10-32NC 12-24NC 1\/4-20NC, (Metric) M3 x 0.5 M4 x 0.7 M5 x 0.8 M6 x 1.0 M8 x 1.25 M10 x 1.5Hex Shank Size: 1\/4\"The 3-in-1 combination drill and tap bit set can complete hole drilling, tapping, and countersinking. Three processes in one, one-step operation, greatly saving processing steps, improving work efficiency, and providing accurate processing results. Tap drill bit set includes a quick-change adapter for easy bit changes.Metric combination tap drill bit is used to create threaded holes, great for situations where both drilling and tapping are required. Can process both through holes and blind holes. Suitable for tapping aluminum, bronze, hard plastics, and other softer materials.Self-centering point, do not need assistant center drilling or center punching. Quick change 1\/4-inch hex shank can be used on power tools more easily and securely. A tapered end on hex shank can prevent excessive tapping. It exceeds the tap to prevent thread breakage from over-drilling.HSS4341 thread taps offer standard hardness, good wear resistance and heat resistance for general purpose threading applications. Features the base substrate without any coatings, well suited for most general purpose tapping.Works with drilling machines, tapping machines, CNC and milling machines. Use with tapping oil to get higher quality threads and more durable taps. Machine taps are suggested to be used with tap collets with overload protection.Tips: Recommended feed rate: general steel: 6-15m\/min; harder steel: 5-10m\/min; stainless steel: 2-7m\/min; cast iron: 8-10m\/min. The torque caused by too fast feed speed is too large, which can easily cause the tap to break. Taps are prone to chipping or breaking due to speed overload or non-vertical tapping.\u003c\/p\u003e\n\u003c\/div\u003e","brand":"LinkMejor","offers":[{"title":"Default","offer_id":55030603809140,"sku":"B0DDTDBDTT","price":19.69,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1007\/5799\/5892\/files\/71-pdaDoGnL._SL1500.jpg?v=1785106479"},{"product_id":"combination-drill-and-tap-bit-metric-m8-x-1-25-thread-1-4-hex-shank-threading-sc","title":"Combination Drill and Tap Bit, Metric M8 x 1.25 Thread 1\/4\" Hex Shank, Threading Screw Taps Spiral Flute Machine Drilling Tapping Tool, High Speed Steel (HSS) 6542","description":"\u003cdiv class=\"product-description\"\u003e\n\u003ch2\u003eKey Features\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003eCombination Drill and Tap Bit Thread size M8 x 1.25; hex shank size 1\/4\"; drilling + tapping length 28mm \/ 1.1\"; total length 67.9mm \/ 2.67\". Metric combination tap drill bit is used to create threaded holes, great for situations where both drilling and tapping are required. Can process both through holes and blind holes.\u003c\/li\u003e\n\u003cli\u003e3-in-1 Combination The 3-in-1 combination drill and tap bit set can complete hole drilling, tapping, and countersinking. Three processes in one, one-step operation, greatly saving processing steps, improving work efficiency, and providing accurate processing results.\u003c\/li\u003e\n\u003cli\u003eSpecial Design Self-centering point, do not need assistant center drilling or center punching. Quick change 1\/4-inch hex shank can be used on power tools more easily and securely. A tapered end on hex shank can prevent excessive tapping. It exceeds the tap to prevent thread breakage from over-drilling.\u003c\/li\u003e\n\u003cli\u003e6542 (M2) High Speed Steel The high speed steel screw taps run at high speeds and generate threads quickly and efficiently, offering high hardness, wear resistance, and good toughness. Features the base substrate without any coatings, well suited for most general purpose tapping.\u003c\/li\u003e\n\u003cli\u003eTips Works with drilling machines, tapping machines, CNC and milling machines. Use with tapping oil to get higher quality threads and more durable taps. Machine taps are suggested to be used with tap collets with overload protection. Recommended feed rate general steel 6-15m\/min; harder steel 5-10m\/min; stainless steel 2-7m\/min; cast iron 8-10m\/min.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003eProduct Description\u003c\/h2\u003e\n\u003cp\u003eThread Size: M8 x 1.25Hex Shank Size: 1\/4\"Drilling + Tapping Length: 28mm \/ 1.1\"Total Length: 67.9mm \/ 2.67\"Material: High Speed Steel 6542Finish: Uncoated1pcs x Combination Drill and Tap BitThe 3-in-1 combination drill and tap bit set can complete hole drilling, tapping, and countersinking. Three processes in one, one-step operation, greatly saving processing steps, improving work efficiency, and providing accurate processing results.Self-centering point, do not need assistant center drilling or center punching. Quick change 1\/4-inch hex shank can be used on power tools more easily and securely. A tapered end on hex shank can prevent excessive tapping. It exceeds the tap to prevent thread breakage from over-drilling.6542 (M2) high speed steel screw taps run at high speeds and generate threads quickly and efficiently, offering high hardness, wear resistance, and good toughness. Features the base substrate without any coatings, well suited for most general purpose tapping.Tips: Recommended feed rate: general steel: 6-15m\/min; harder steel: 5-10m\/min; stainless steel: 2-7m\/min; cast iron: 8-10m\/min. The torque caused by too fast feed speed is too large, which can easily cause the tap to break. Taps are prone to chipping or breaking due to speed overload or non-vertical tapping.\u003c\/p\u003e\n\u003c\/div\u003e","brand":"LinkMejor","offers":[{"title":"Default","offer_id":55030603874676,"sku":"B0DDTFHPK2","price":8.29,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1007\/5799\/5892\/files\/51XZHJgpFZL._SL1500.jpg?v=1785106493"},{"product_id":"combination-drill-and-tap-bit-metric-m10-x-1-5-thread-1-4-hex-shank-threading-sc","title":"Combination Drill and Tap Bit, Metric M10 x 1.5 Thread 1\/4\" Hex Shank, Threading Screw Taps Spiral Flute Machine Drilling Tapping Tool, High Speed Steel (HSS) 6542","description":"\u003cdiv class=\"product-description\"\u003e\n\u003ch2\u003eKey Features\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003eCombination Drill and Tap Bit Thread size M10 x 1.5; hex shank size 1\/4\"; drilling + tapping length 26mm \/ 1.02\"; total length 70mm \/ 2.76\". Metric combination tap drill bit is used to create threaded holes, great for situations where both drilling and tapping are required. Can process both through holes and blind holes.\u003c\/li\u003e\n\u003cli\u003e3-in-1 Combination The 3-in-1 combination drill and tap bit set can complete hole drilling, tapping, and countersinking. Three processes in one, one-step operation, greatly saving processing steps, improving work efficiency, and providing accurate processing results.\u003c\/li\u003e\n\u003cli\u003eSpecial Design Self-centering point, do not need assistant center drilling or center punching. Quick change 1\/4-inch hex shank can be used on power tools more easily and securely. A tapered end on hex shank can prevent excessive tapping. It exceeds the tap to prevent thread breakage from over-drilling.\u003c\/li\u003e\n\u003cli\u003e6542 (M2) High Speed Steel The high speed steel screw taps run at high speeds and generate threads quickly and efficiently, offering high hardness, wear resistance, and good toughness. Features the base substrate without any coatings, well suited for most general purpose tapping.\u003c\/li\u003e\n\u003cli\u003eTips Works with drilling machines, tapping machines, CNC and milling machines. Use with tapping oil to get higher quality threads and more durable taps. Machine taps are suggested to be used with tap collets with overload protection. Recommended feed rate general steel 6-15m\/min; harder steel 5-10m\/min; stainless steel 2-7m\/min; cast iron 8-10m\/min.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003eProduct Description\u003c\/h2\u003e\n\u003cp\u003eThread Size: M10 x 1.5Hex Shank Size: 1\/4\"Drilling + Tapping Length: 26mm \/ 1.02\"Total Length: 70mm \/ 2.76\"Material: High Speed Steel 6542Finish: Uncoated1pcs x Combination Drill and Tap BitThe 3-in-1 combination drill and tap bit set can complete hole drilling, tapping, and countersinking. Three processes in one, one-step operation, greatly saving processing steps, improving work efficiency, and providing accurate processing results.Metric combination tap drill bit is used to create threaded holes, great for situations where both drilling and tapping are required. Can process both through holes and blind holes. Suitable for aluminum, mould steel, stainless steel, bronze, hard plastics, etc.. Self-centering point, do not need assistant center drilling or center punching. Quick change 1\/4-inch hex shank can be used on power tools more easily and securely. A tapered end on hex shank can prevent excessive tapping. It exceeds the tap to prevent thread breakage from over-drilling.6542 (M2) high speed steel screw taps run at high speeds and generate threads quickly and efficiently, offering high hardness, wear resistance, and good toughness. Features the base substrate without any coatings, well suited for most general purpose tapping.Works with drilling machines, tapping machines, CNC and milling machines. Use with tapping oil to get higher quality threads and more durable taps. Machine taps are suggested to be used with tap collets with overload protection.Tips: Recommended feed rate: general steel: 6-15m\/min; harder steel: 5-10m\/min; stainless steel: 2-7m\/min; cast iron: 8-10m\/min. The torque caused by too fast feed speed is too large, which can easily cause the tap to break. Taps are prone to chipping or breaking due to speed overload or non-vertical tapping.\u003c\/p\u003e\n\u003c\/div\u003e","brand":"LinkMejor","offers":[{"title":"Default","offer_id":55030604235124,"sku":"B0DDTFVHL3","price":9.09,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1007\/5799\/5892\/files\/51YNMPM0fZL._SL1500.jpg?v=1785106506"},{"product_id":"6pcs-combination-drill-tap-bit-set-sae-6-32nc-to-1-4-20nc-high-speed-steel-1-4-h","title":"6pcs Combination Drill Tap Bit Set SAE 6-32NC to 1\/4-20NC High-Speed Steel 1\/4\" Hex Shank Titanium Coated Screw Threading Drilling Tapping Tool Kit","description":"\u003cdiv class=\"product-description\"\u003e\n\u003ch2\u003eKey Features\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003eCombination Drill and Tap Bit Thread size (SAE) 6-32NC 8-32NC 10-24NC 10-32NC 12-24NC 1\/4-20NC. Can process both through holes and blind holes. Comes with a sturdy plastic box which is lightweight and durable, easy to store and organize.\u003c\/li\u003e\n\u003cli\u003e3-in-1 Combination The 3-in-1 combination drill and tap bit set can complete hole drilling, tapping, and countersinking. Three processes in one, one-step operation, greatly saving processing steps, improving work efficiency, and providing accurate processing results.\u003c\/li\u003e\n\u003cli\u003eSpecial Design Self-centering point, do not need assistant center drilling or center punching. Quick change 1\/4-inch hex shank can be used on power tools more easily and securely. A tapered end on hex shank can prevent excessive tapping. It exceeds the tap to prevent thread breakage from over-drilling.\u003c\/li\u003e\n\u003cli\u003e4341 High Speed Steel The high speed steel screw taps run at high speeds and generate threads quickly and efficiently, offering high hardness, wear resistance, and good toughness. Titanium coating provides excellent corrosion resistance, and reduces the coefficient of friction for smoother tapping.\u003c\/li\u003e\n\u003cli\u003eTips Works with drilling machines, tapping machines, CNC and milling machines. Use with tapping oil to get higher quality threads and more durable taps. Machine taps are suggested to be used with tap collets with overload protection. Recommended feed rate general steel 6-15m\/min; harder steel 5-10m\/min; stainless steel 2-7m\/min; cast iron 8-10m\/min.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003eProduct Description\u003c\/h2\u003e\n\u003cp\u003eHex Shank Size: 1\/4\"Thread Size: (SAE) 6-32NC 8-32NC 10-24NC 10-32NC 12-24NC 1\/4-20NCDrilling + Tapping Length: 21mm \/ 0.83\", 20mm \/ 0.79\", 25mm \/ 0.98\", 24mm \/ 0.94\", 23mm \/ 0.9\",25mm \/ 0.98\".1. The 3-in-1 combination drill and tap bit set can complete hole drilling, tapping, and countersinking. Three processes in one, one-step operation, greatly saving processing steps, improving work efficiency, and providing accurate processing results.2. Metric combination tap drill bit is used to create threaded holes, great for situations where both drilling and tapping are required. Can process both through holes and blind holes. Suitable for aluminum, mould steel, stainless steel, bronze, hard plastics, etc.3. Self-centering point, do not need assistant center drilling or center punching. Quick change 1\/4-inch hex shank can be used on power tools more easily and securely. A tapered end on hex shank can prevent excessive tapping. It exceeds the tap to prevent thread breakage from over-drilling.4. 4341 high-speed steel screw taps run at high speeds and generate threads quickly and efficiently, offering high hardness, wear resistance, and good toughness. Titanium coating provides excellent corrosion resistance, and reduces the coefficient of friction for smoother tapping.5. Works with drilling machines, tapping machines, CNC, and milling machines. Use with tapping oil to get higher quality threads and more durable taps. Machine taps are suggested to be used with tap collets with overload protection.6. Tips: Recommended feed rate: general steel: 6-15m\/min; harder steel: 5-10m\/min; stainless steel: 2-7m\/min; cast iron: 8-10m\/min. The torque caused by too fast feed speed is too large, which can easily cause the tap to break. Taps are prone to chipping or breaking due to speed overload or non-vertical tapping.\u003c\/p\u003e\n\u003c\/div\u003e","brand":"LinkMejor","offers":[{"title":"Default","offer_id":55030604431732,"sku":"B0DDTG934W","price":9.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1007\/5799\/5892\/files\/71tzkneLeGL._SL1500.jpg?v=1785106532"},{"product_id":"combination-drill-and-tap-bits-metric-m10-x-1-5-thread-1-4-hex-shank-tialn-coate","title":"Combination Drill and Tap Bits Metric M10 x 1.5 Thread 1\/4\" Hex Shank TiAlN Coated Threading Screw Taps 6542 High Speed Steel Machine Drilling Tapping Tool Kit","description":"\u003cdiv class=\"product-description\"\u003e\n\u003ch2\u003eKey Features\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003eCombination Drill and Tap Bit Thread size M10 x 1.5; hex shank size 1\/4\"; drilling + tapping length 30mm \/ 1.18\"; total length 57mm \/ 2.24\". Metric combination tap drill bit is used to create threaded holes, great for situations where both drilling and tapping are required. Can process both through holes and blind holes.\u003c\/li\u003e\n\u003cli\u003e3-in-1 Combination The 3-in-1 combination drill and tap bit set can complete hole drilling, tapping, and countersinking. Three processes in one, one-step operation, greatly saving processing steps, improving work efficiency, and providing accurate processing results.\u003c\/li\u003e\n\u003cli\u003eSpecial Design Self-centering point, do not need assistant center drilling or center punching. Quick change 1\/4-inch hex shank can be used on power tools more easily and securely. A tapered end on hex shank can prevent excessive tapping. It exceeds the tap to prevent thread breakage from over-drilling.\u003c\/li\u003e\n\u003cli\u003e6542 (M2) High Speed Steel The high speed steel screw taps run at high speeds and generate threads quickly and efficiently, offering high hardness, wear resistance, and good toughness. TiAlN coating provides high hardness, increased lubricity, and improved heat resistance.\u003c\/li\u003e\n\u003cli\u003eTips Works with drilling machines, tapping machines, CNC and milling machines. Use with tapping oil to get higher quality threads and more durable taps. Machine taps are suggested to be used with tap collets with overload protection. Recommended feed rate general steel 6-15m\/min; harder steel 5-10m\/min; stainless steel 2-7m\/min; cast iron 8-10m\/min.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003eProduct Description\u003c\/h2\u003e\n\u003cp\u003eThe 3-in-1 combination drill and tap bit set can complete hole drilling, tapping, and countersinking. Three processes in one, one-step operation, greatly saving processing steps, improving work efficiency, and providing accurate processing results.Metric combination tap drill bit is used to create threaded holes, great for situations where both drilling and tapping are required. Can process both through holes and blind holes. Suitable for aluminum, mould steel, stainless steel, bronze, hard plastics, etc..Self-centering point, do not need assistant center drilling or center punching. Quick change 1\/4-inch hex shank can be used on power tools more easily and securely. A tapered end on hex shank can prevent excessive tapping. It exceeds the tap to prevent thread breakage from over-drilling.6542 high speed steel screw taps run at high speeds and generate threads quickly and efficiently, offering high hardness, wear resistance, and good toughness. TiAlN coating improves drill wear resistance, corrosion resistance and high temperature stability, and prolongs service life.Works with drilling machines, tapping machines, CNC and milling machines. Use with tapping oil to get higher quality threads and more durable taps. Machine taps are suggested to be used with tap collets with overload protection.Tips: Recommended feed rate: general steel: 6-15m\/min; harder steel: 5-10m\/min; stainless steel: 2-7m\/min; cast iron: 8-10m\/min. The torque caused by too fast feed speed is too large, which can easily cause the tap to break. Taps are prone to chipping or breaking due to speed overload or non-vertical tapping.\u003c\/p\u003e\n\u003c\/div\u003e","brand":"LinkMejor","offers":[{"title":"Default","offer_id":55030606233972,"sku":"B0DDTGKLDJ","price":11.13,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1007\/5799\/5892\/files\/51jbdO1oPuL._SL1500.jpg?v=1785106547"},{"product_id":"combination-drill-and-tap-bits-metric-m10-x-1-5-thread-1-4-hex-shank-4341-high-s","title":"Combination Drill and Tap Bits, Metric M10 x 1.5 Thread 1\/4\" Hex Shank 4341 High Speed Steel Threading Screw Taps Machine Drilling Tapping Tool Kit","description":"\u003cdiv class=\"product-description\"\u003e\n\u003ch2\u003eKey Features\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003eCombination Drill and Tap Bit Thread size M10 x 1.5; hex shank size 1\/4\"; drilling + tapping length 31mm \/ 1.22\", total length 58mm \/ 2.28\". Metric combination tap drill bit is used to create threaded holes, great for situations where both drilling and tapping are required. Can process both through holes and blind holes.\u003c\/li\u003e\n\u003cli\u003e3-in-1 Combination The 3-in-1 combination drill and tap bit set can complete hole drilling, tapping, and countersinking. Three processes in one, one-step operation, greatly saving processing steps, improving work efficiency, and providing accurate processing results. Used to create threaded holes, great for situations where both drilling and tapping are required.\u003c\/li\u003e\n\u003cli\u003eSpecial Design Self-centering point, do not need assistant center drilling or center punching. Quick change 1\/4-inch hex shank can be used on power tools more easily and securely. A tapered end on hex shank can prevent excessive tapping. It exceeds the tap to prevent thread breakage from over-drilling.\u003c\/li\u003e\n\u003cli\u003e6542 High Speed Steel The high speed steel screw taps run at high speeds and generate threads quickly and efficiently, offering high hardness, wear resistance, and good toughness. Features the base substrate without any coatings, well suited for most general purpose tapping.\u003c\/li\u003e\n\u003cli\u003eTips Works with drilling machines, tapping machines, CNC and milling machines. Use with tapping oil to get higher quality threads and more durable taps. Machine taps are suggested to be used with tap collets with overload protection. Recommended feed rate general steel 6-15m\/min; harder steel 5-10m\/min; stainless steel 2-7m\/min; cast iron 8-10m\/min.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003eProduct Description\u003c\/h2\u003e\n\u003cp\u003eThe 3-in-1 combination drill and tap bit set can complete hole drilling, tapping, and countersinking. Three processes in one, one-step operation, greatly saving processing steps, improving work efficiency, and providing accurate processing results.Metric combination tap drill bit is used to create threaded holes, great for situations where both drilling and tapping are required. Can process both through holes and blind holes. Suitable for aluminum, mould steel, stainless steel, bronze, hard plastics, etc..Self-centering point, do not need assistant center drilling or center punching. Quick change 1\/4-inch hex shank can be used on power tools more easily and securely. A tapered end on hex shank can prevent excessive tapping. It exceeds the tap to prevent thread breakage from over-drilling.6542 high speed steel screw taps run at high speeds and generate threads quickly and efficiently, offering high hardness, wear resistance, and good toughness. Features the base substrate without any coatings, well suited for most general purpose tapping.Works with drilling machines, tapping machines, CNC and milling machines. Use with tapping oil to get higher quality threads and more durable taps. Machine taps are suggested to be used with tap collets with overload protection.Tips: Recommended feed rate: general steel: 6-15m\/min; harder steel: 5-10m\/min; stainless steel: 2-7m\/min; cast iron: 8-10m\/min. The torque caused by too fast feed speed is too large, which can easily cause the tap to break. Taps are prone to chipping or breaking due to speed overload or non-vertical tapping.\u003c\/p\u003e\n\u003c\/div\u003e","brand":"LinkMejor","offers":[{"title":"Default","offer_id":55030606692724,"sku":"B0DDTL3WHZ","price":14.59,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1007\/5799\/5892\/files\/5120wMwi4OL._SL1500.jpg?v=1785106562"},{"product_id":"combination-drill-and-tap-bits-metric-m5-x-0-8-thread-1-4-hex-shank-4341-high-sp","title":"Combination Drill and Tap Bits, Metric M5 x 0.8 Thread 1\/4\" Hex Shank 4341 High Speed Steel Threading Screw Taps Machine Drilling Tapping Tool Kit","description":"\u003cdiv class=\"product-description\"\u003e\n\u003ch2\u003eKey Features\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003eCombination Drill and Tap Bit Thread size M5 x 0.8; hex shank size 1\/4\"; drilling + tapping length 28mm \/ 1.1\", total length 41mm \/ 1.6\". Metric combination tap drill bit is used to create threaded holes, great for situations where both drilling and tapping are required. Can process both through holes and blind holes.\u003c\/li\u003e\n\u003cli\u003e3-in-1 Combination The 3-in-1 combination drill and tap bit set can complete hole drilling, tapping, and countersinking. Three processes in one, one-step operation, greatly saving processing steps, improving work efficiency, and providing accurate processing results. Used to create threaded holes, great for situations where both drilling and tapping are required.\u003c\/li\u003e\n\u003cli\u003eSpecial Design Self-centering point, do not need assistant center drilling or center punching. Quick change 1\/4-inch hex shank can be used on power tools more easily and securely. A tapered end on hex shank can prevent excessive tapping. It exceeds the tap to prevent thread breakage from over-drilling.\u003c\/li\u003e\n\u003cli\u003e6542 High Speed Steel The high speed steel screw taps run at high speeds and generate threads quickly and efficiently, offering high hardness, wear resistance, and good toughness. Features the base substrate without any coatings, well suited for most general purpose tapping.\u003c\/li\u003e\n\u003cli\u003eTips Works with drilling machines, tapping machines, CNC and milling machines. Use with tapping oil to get higher quality threads and more durable taps. Machine taps are suggested to be used with tap collets with overload protection. Recommended feed rate general steel 6-15m\/min; harder steel 5-10m\/min; stainless steel 2-7m\/min; cast iron 8-10m\/min.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003eProduct Description\u003c\/h2\u003e\n\u003cp\u003eThe 3-in-1 combination drill and tap bit set can complete hole drilling, tapping, and countersinking. Three processes in one, one-step operation, greatly saving processing steps, improving work efficiency, and providing accurate processing results.Metric combination tap drill bit is used to create threaded holes, great for situations where both drilling and tapping are required. Can process both through holes and blind holes. Suitable for aluminum, mould steel, stainless steel, bronze, hard plastics, etc..Self-centering point, do not need assistant center drilling or center punching. Quick change 1\/4-inch hex shank can be used on power tools more easily and securely. A tapered end on hex shank can prevent excessive tapping. It exceeds the tap to prevent thread breakage from over-drilling.6542 high speed steel screw taps run at high speeds and generate threads quickly and efficiently, offering high hardness, wear resistance, and good toughness. Features the base substrate without any coatings, well suited for most general purpose tapping.Works with drilling machines, tapping machines, CNC and milling machines. Use with tapping oil to get higher quality threads and more durable taps. Machine taps are suggested to be used with tap collets with overload protection.Tips: Recommended feed rate: general steel: 6-15m\/min; harder steel: 5-10m\/min; stainless steel: 2-7m\/min; cast iron: 8-10m\/min. The torque caused by too fast feed speed is too large, which can easily cause the tap to break. Taps are prone to chipping or breaking due to speed overload or non-vertical tapping.\u003c\/p\u003e\n\u003c\/div\u003e","brand":"LinkMejor","offers":[{"title":"Default","offer_id":55030607184244,"sku":"B0DDTLCMPG","price":8.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1007\/5799\/5892\/files\/51mgBze6WRL._SL1500.jpg?v=1785106577"},{"product_id":"combination-drill-and-tap-bits-metric-m4-x-0-7-thread-1-4-hex-shank-tialn-coated","title":"Combination Drill and Tap Bits Metric M4 x 0.7 Thread 1\/4\" Hex Shank TiAlN Coated Threading Screw Taps 6542 High Speed Steel Machine Drilling Tapping Tool Kit","description":"\u003cdiv class=\"product-description\"\u003e\n\u003ch2\u003eKey Features\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003eCombination Drill and Tap Bit Thread size M4 x 0.7; hex shank size 1\/4\"; drilling + tapping length 16mm \/ 0.63\", total length 40mm \/ 1.57\". Metric combination tap drill bit is used to create threaded holes, great for situations where both drilling and tapping are required. Can process both through holes and blind holes.\u003c\/li\u003e\n\u003cli\u003e3-in-1 Combination The 3-in-1 combination drill and tap bit set can complete hole drilling, tapping, and countersinking. Three processes in one, one-step operation, greatly saving processing steps, improving work efficiency, and providing accurate processing results. Used to create threaded holes, great for situations where both drilling and tapping are required.\u003c\/li\u003e\n\u003cli\u003eSpecial Design Self-centering point, do not need assistant center drilling or center punching. Quick change 1\/4-inch hex shank can be used on power tools more easily and securely. A tapered end on hex shank can prevent excessive tapping. It exceeds the tap to prevent thread breakage from over-drilling.\u003c\/li\u003e\n\u003cli\u003e6542 High Speed Steel The high-speed steel screw taps run at high speeds and generate threads quickly and efficiently, offering high hardness, wear resistance, and good toughness. TiAlN coating improves drill wear resistance, corrosion resistance and high temperature stability, and prolongs service life.\u003c\/li\u003e\n\u003cli\u003eTips Works with drilling machines, tapping machines, CNC and milling machines. Use with tapping oil to get higher quality threads and more durable taps. Machine taps are suggested to be used with tap collets with overload protection. Recommended feed rate general steel 6-15m\/min; harder steel 5-10m\/min; stainless steel 2-7m\/min; cast iron 8-10m\/min.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003eProduct Description\u003c\/h2\u003e\n\u003cp\u003eThe 3-in-1 combination drill and tap bit set can complete hole drilling, tapping, and countersinking. Three processes in one, one-step operation, greatly saving processing steps, improving work efficiency, and providing accurate processing results.Metric combination tap drill bit is used to create threaded holes, great for situations where both drilling and tapping are required. Can process both through holes and blind holes. Suitable for aluminum, mould steel, stainless steel, bronze, hard plastics, etc..Self-centering point, do not need assistant center drilling or center punching. Quick change 1\/4-inch hex shank can be used on power tools more easily and securely. A tapered end on hex shank can prevent excessive tapping. It exceeds the tap to prevent thread breakage from over-drilling.6542 high speed steel screw taps run at high speeds and generate threads quickly and efficiently, offering high hardness, wear resistance, and good toughness. TiAlN coating improves drill wear resistance, corrosion resistance and high temperature stability, and prolongs service life.Works with drilling machines, tapping machines, CNC and milling machines. Use with tapping oil to get higher quality threads and more durable taps. Machine taps are suggested to be used with tap collets with overload protection.Tips: Recommended feed rate: general steel: 6-15m\/min; harder steel: 5-10m\/min; stainless steel: 2-7m\/min; cast iron: 8-10m\/min. The torque caused by too fast feed speed is too large, which can easily cause the tap to break. Taps are prone to chipping or breaking due to speed overload or non-vertical tapping.\u003c\/p\u003e\n\u003c\/div\u003e","brand":"LinkMejor","offers":[{"title":"Default","offer_id":55030609772916,"sku":"B0DDTLTQG7","price":11.55,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1007\/5799\/5892\/files\/51gyO9j1wtL._SL1500.jpg?v=1785106592"},{"product_id":"combination-drill-and-tap-bits-metric-m6-x-1-thread-1-4-hex-shank-tialn-coated-t","title":"Combination Drill and Tap Bits Metric M6 x 1 Thread 1\/4\" Hex Shank TiAlN Coated Threading Screw Taps 6542 High Speed Steel Machine Drilling Tapping Tool Kit","description":"\u003cdiv class=\"product-description\"\u003e\n\u003ch2\u003eKey Features\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003eCombination Drill and Tap Bit Thread size M6 x 1; hex shank size 1\/4\"; drilling + tapping length 18mm \/ 0.7\", total length 43mm \/ 1.69\". Metric combination tap drill bit is used to create threaded holes, great for situations where both drilling and tapping are required. Can process both through holes and blind holes.\u003c\/li\u003e\n\u003cli\u003e3-in-1 Combination The 3-in-1 combination drill and tap bit set can complete hole drilling, tapping, and countersinking. Three processes in one, one-step operation, greatly saving processing steps, improving work efficiency, and providing accurate processing results. Used to create threaded holes, great for situations where both drilling and tapping are required.\u003c\/li\u003e\n\u003cli\u003eSpecial Design Self-centering point, do not need assistant center drilling or center punching. Quick change 1\/4-inch hex shank can be used on power tools more easily and securely. A tapered end on hex shank can prevent excessive tapping. It exceeds the tap to prevent thread breakage from over-drilling.\u003c\/li\u003e\n\u003cli\u003e6542 High Speed Steel The high-speed steel screw taps run at high speeds and generate threads quickly and efficiently, offering high hardness, wear resistance, and good toughness. TiAlN coating improves drill wear resistance, corrosion resistance and high temperature stability, and prolongs service life.\u003c\/li\u003e\n\u003cli\u003eTips Works with drilling machines, tapping machines, CNC and milling machines. Use with tapping oil to get higher quality threads and more durable taps. Machine taps are suggested to be used with tap collets with overload protection. Recommended feed rate general steel 6-15m\/min; harder steel 5-10m\/min; stainless steel 2-7m\/min; cast iron 8-10m\/min.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003eProduct Description\u003c\/h2\u003e\n\u003cp\u003eThe 3-in-1 combination drill and tap bit set can complete hole drilling, tapping, and countersinking. Three processes in one, one-step operation, greatly saving processing steps, improving work efficiency, and providing accurate processing results.Metric combination tap drill bit is used to create threaded holes, great for situations where both drilling and tapping are required. Can process both through holes and blind holes. Suitable for aluminum, mould steel, stainless steel, bronze, hard plastics, etc..Self-centering point, do not need assistant center drilling or center punching. Quick change 1\/4-inch hex shank can be used on power tools more easily and securely. A tapered end on hex shank can prevent excessive tapping. It exceeds the tap to prevent thread breakage from over-drilling.6542 high speed steel screw taps run at high speeds and generate threads quickly and efficiently, offering high hardness, wear resistance, and good toughness. TiAlN coating improves drill wear resistance, corrosion resistance and high temperature stability, and prolongs service life.Works with drilling machines, tapping machines, CNC and milling machines. Use with tapping oil to get higher quality threads and more durable taps. Machine taps are suggested to be used with tap collets with overload protection.Tips: Recommended feed rate: general steel: 6-15m\/min; harder steel: 5-10m\/min; stainless steel: 2-7m\/min; cast iron: 8-10m\/min. The torque caused by too fast feed speed is too large, which can easily cause the tap to break. Taps are prone to chipping or breaking due to speed overload or non-vertical tapping.\u003c\/p\u003e\n\u003c\/div\u003e","brand":"LinkMejor","offers":[{"title":"Default","offer_id":55030610329972,"sku":"B0DDTN3W8M","price":10.89,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1007\/5799\/5892\/files\/519z-duTltL._SL1500.jpg?v=1785106607"},{"product_id":"combination-drill-and-tap-bits-metric-m6-x-1-thread-1-4-hex-shank-4341-high-spee","title":"Combination Drill and Tap Bits, Metric M6 x 1 Thread 1\/4\" Hex Shank 4341 High Speed Steel Threading Screw Taps Machine Drilling Tapping Tool Kit","description":"\u003cdiv class=\"product-description\"\u003e\n\u003ch2\u003eKey Features\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003eCombination Drill and Tap Bit Thread size M6 x 1; hex shank size 1\/4\"; drilling + tapping length 23mm \/ 0.9\", total length 43mm \/ 1.7\". Metric combination tap drill bit is used to create threaded holes, great for situations where both drilling and tapping are required. Can process both through holes and blind holes.\u003c\/li\u003e\n\u003cli\u003e3-in-1 Combination The 3-in-1 combination drill and tap bit set can complete hole drilling, tapping, and countersinking. Three processes in one, one-step operation, greatly saving processing steps, improving work efficiency, and providing accurate processing results. Used to create threaded holes, great for situations where both drilling and tapping are required.\u003c\/li\u003e\n\u003cli\u003eSpecial Design Self-centering point, do not need assistant center drilling or center punching. Quick change 1\/4-inch hex shank can be used on power tools more easily and securely. A tapered end on hex shank can prevent excessive tapping. It exceeds the tap to prevent thread breakage from over-drilling.\u003c\/li\u003e\n\u003cli\u003e6542 High Speed Steel The high speed steel screw taps run at high speeds and generate threads quickly and efficiently, offering high hardness, wear resistance, and good toughness. Features the base substrate without any coatings, well suited for most general purpose tapping.\u003c\/li\u003e\n\u003cli\u003eTips Works with drilling machines, tapping machines, CNC and milling machines. Use with tapping oil to get higher quality threads and more durable taps. Machine taps are suggested to be used with tap collets with overload protection. Recommended feed rate general steel 6-15m\/min; harder steel 5-10m\/min; stainless steel 2-7m\/min; cast iron 8-10m\/min.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003eProduct Description\u003c\/h2\u003e\n\u003cp\u003eThe 3-in-1 combination drill and tap bit set can complete hole drilling, tapping, and countersinking. Three processes in one, one-step operation, greatly saving processing steps, improving work efficiency, and providing accurate processing results.Metric combination tap drill bit is used to create threaded holes, great for situations where both drilling and tapping are required. Can process both through holes and blind holes. Suitable for aluminum, mould steel, stainless steel, bronze, hard plastics, etc..Self-centering point, do not need assistant center drilling or center punching. Quick change 1\/4-inch hex shank can be used on power tools more easily and securely. A tapered end on hex shank can prevent excessive tapping. It exceeds the tap to prevent thread breakage from over-drilling.6542 high speed steel screw taps run at high speeds and generate threads quickly and efficiently, offering high hardness, wear resistance, and good toughness. Features the base substrate without any coatings, well suited for most general purpose tapping.Works with drilling machines, tapping machines, CNC and milling machines. Use with tapping oil to get higher quality threads and more durable taps. Machine taps are suggested to be used with tap collets with overload protection.Tips: Recommended feed rate: general steel: 6-15m\/min; harder steel: 5-10m\/min; stainless steel: 2-7m\/min; cast iron: 8-10m\/min. The torque caused by too fast feed speed is too large, which can easily cause the tap to break. Taps are prone to chipping or breaking due to speed overload or non-vertical tapping.\u003c\/p\u003e\n\u003c\/div\u003e","brand":"LinkMejor","offers":[{"title":"Default","offer_id":55030610559348,"sku":"B0DDTNXNW3","price":9.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1007\/5799\/5892\/files\/51sH3KQ7ynL._SL1500.jpg?v=1785106624"},{"product_id":"combination-drill-and-tap-bits-metric-m3-x-0-5-thread-1-4-hex-shank-tialn-coated","title":"Combination Drill and Tap Bits Metric M3 x 0.5 Thread 1\/4\" Hex Shank TiAlN Coated Threading Screw Taps 6542 High Speed Steel Machine Drilling Tapping Tool Kit","description":"\u003cdiv class=\"product-description\"\u003e\n\u003ch2\u003eKey Features\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003eCombination Drill and Tap Bit Thread size M3 x 0.5; hex shank size 1\/4\"; drilling + tapping length 11mm \/ 0.43\", total length 34mm \/ 1.34\". Metric combination tap drill bit is used to create threaded holes, great for situations where both drilling and tapping are required. Can process both through holes and blind holes.\u003c\/li\u003e\n\u003cli\u003e3-in-1 Combination The 3-in-1 combination drill and tap bit set can complete hole drilling, tapping, and countersinking. Three processes in one, one-step operation, greatly saving processing steps, improving work efficiency, and providing accurate processing results. Used to create threaded holes, great for situations where both drilling and tapping are required.\u003c\/li\u003e\n\u003cli\u003eSpecial Design Self-centering point, do not need assistant center drilling or center punching. Quick change 1\/4-inch hex shank can be used on power tools more easily and securely. A tapered end on hex shank can prevent excessive tapping. It exceeds the tap to prevent thread breakage from over-drilling.\u003c\/li\u003e\n\u003cli\u003e6542 High Speed Steel The high-speed steel screw taps run at high speeds and generate threads quickly and efficiently, offering high hardness, wear resistance, and good toughness. TiAlN coating improves drill wear resistance, corrosion resistance and high temperature stability, and prolongs service life.\u003c\/li\u003e\n\u003cli\u003eTips Works with drilling machines, tapping machines, CNC and milling machines. Use with tapping oil to get higher quality threads and more durable taps. Machine taps are suggested to be used with tap collets with overload protection. Recommended feed rate general steel 6-15m\/min; harder steel 5-10m\/min; stainless steel 2-7m\/min; cast iron 8-10m\/min.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003eProduct Description\u003c\/h2\u003e\n\u003cp\u003eThe 3-in-1 combination drill and tap bit set can complete hole drilling, tapping, and countersinking. Three processes in one, one-step operation, greatly saving processing steps, improving work efficiency, and providing accurate processing results.Metric combination tap drill bit is used to create threaded holes, great for situations where both drilling and tapping are required. Can process both through holes and blind holes. Suitable for aluminum, mould steel, stainless steel, bronze, hard plastics, etc..Self-centering point, do not need assistant center drilling or center punching. Quick change 1\/4-inch hex shank can be used on power tools more easily and securely. A tapered end on hex shank can prevent excessive tapping. It exceeds the tap to prevent thread breakage from over-drilling.6542 high speed steel screw taps run at high speeds and generate threads quickly and efficiently, offering high hardness, wear resistance, and good toughness. TiAlN coating improves drill wear resistance, corrosion resistance and high temperature stability, and prolongs service life.Works with drilling machines, tapping machines, CNC and milling machines. Use with tapping oil to get higher quality threads and more durable taps. Machine taps are suggested to be used with tap collets with overload protection.Tips: Recommended feed rate: general steel: 6-15m\/min; harder steel: 5-10m\/min; stainless steel: 2-7m\/min; cast iron: 8-10m\/min. The torque caused by too fast feed speed is too large, which can easily cause the tap to break. Taps are prone to chipping or breaking due to speed overload or non-vertical tapping.\u003c\/p\u003e\n\u003c\/div\u003e","brand":"LinkMejor","offers":[{"title":"Default","offer_id":55030610985332,"sku":"B0DDTPJTRX","price":12.39,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1007\/5799\/5892\/files\/51zXiYzEv9L._SL1500.jpg?v=1785106637"},{"product_id":"combination-drill-and-tap-bits-metric-m8-x-1-25-thread-1-4-hex-shank-4341-high-s","title":"Combination Drill and Tap Bits, Metric M8 x 1.25 Thread 1\/4\" Hex Shank 4341 High Speed Steel Threading Screw Taps Machine Drilling Tapping Tool Kit","description":"\u003cdiv class=\"product-description\"\u003e\n\u003ch2\u003eKey Features\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003eCombination Drill and Tap Bit Thread size M8 x 1.25; hex shank size 1\/4\"; drilling + tapping length 26mm \/ 1.02\", total length 52mm \/ 2.05\". Metric combination tap drill bit is used to create threaded holes, great for situations where both drilling and tapping are required. Can process both through holes and blind holes.\u003c\/li\u003e\n\u003cli\u003e3-in-1 Combination The 3-in-1 combination drill and tap bit set can complete hole drilling, tapping, and countersinking. Three processes in one, one-step operation, greatly saving processing steps, improving work efficiency, and providing accurate processing results. Used to create threaded holes, great for situations where both drilling and tapping are required.\u003c\/li\u003e\n\u003cli\u003eSpecial Design Self-centering point, do not need assistant center drilling or center punching. Quick change 1\/4-inch hex shank can be used on power tools more easily and securely. A tapered end on hex shank can prevent excessive tapping. It exceeds the tap to prevent thread breakage from over-drilling.\u003c\/li\u003e\n\u003cli\u003e6542 High Speed Steel The high speed steel screw taps run at high speeds and generate threads quickly and efficiently, offering high hardness, wear resistance, and good toughness. Features the base substrate without any coatings, well suited for most general purpose tapping.\u003c\/li\u003e\n\u003cli\u003eTips Works with drilling machines, tapping machines, CNC and milling machines. Use with tapping oil to get higher quality threads and more durable taps. Machine taps are suggested to be used with tap collets with overload protection. Recommended feed rate general steel 6-15m\/min; harder steel 5-10m\/min; stainless steel 2-7m\/min; cast iron 8-10m\/min.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003eProduct Description\u003c\/h2\u003e\n\u003cp\u003eThe 3-in-1 combination drill and tap bit set can complete hole drilling, tapping, and countersinking. Three processes in one, one-step operation, greatly saving processing steps, improving work efficiency, and providing accurate processing results.Metric combination tap drill bit is used to create threaded holes, great for situations where both drilling and tapping are required. Can process both through holes and blind holes. Suitable for aluminum, mould steel, stainless steel, bronze, hard plastics, etc..Self-centering point, do not need assistant center drilling or center punching. Quick change 1\/4-inch hex shank can be used on power tools more easily and securely. A tapered end on hex shank can prevent excessive tapping. It exceeds the tap to prevent thread breakage from over-drilling.6542 high speed steel screw taps run at high speeds and generate threads quickly and efficiently, offering high hardness, wear resistance, and good toughness. Features the base substrate without any coatings, well suited for most general purpose tapping.Works with drilling machines, tapping machines, CNC and milling machines. Use with tapping oil to get higher quality threads and more durable taps. Machine taps are suggested to be used with tap collets with overload protection.Tips: Recommended feed rate: general steel: 6-15m\/min; harder steel: 5-10m\/min; stainless steel: 2-7m\/min; cast iron: 8-10m\/min. The torque caused by too fast feed speed is too large, which can easily cause the tap to break. Taps are prone to chipping or breaking due to speed overload or non-vertical tapping.\u003c\/p\u003e\n\u003c\/div\u003e","brand":"LinkMejor","offers":[{"title":"Default","offer_id":55030611149172,"sku":"B0DDTRQ49Q","price":9.39,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1007\/5799\/5892\/files\/51N0_5PMbKL._SL1500.jpg?v=1785106651"},{"product_id":"m3-x-0-5-hand-taps-and-2-5mm-drill-bit-set-metric-sks2-straight-3-flutes-bottomi","title":"M3 x 0.5 Hand Taps and 2.5mm Drill Bit Set,Metric SKS2 Straight 3 Flutes Bottoming Taper Split Point Cobalt Metric Twist Drilling Tool 13 Pcs","description":"\u003cdiv class=\"product-description\"\u003e\n\u003ch2\u003eKey Features\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003eHand Tap Material SKS2;Color Silver Tone;Flute Length(Approximately) 20mm\/ 0.8\";Pitch Size 0.5mm;Square End Size 3 x 3mm \/ 0.12\" x 0.12\"(L*W);Shank Diameter 4mm \/ 0.16\";Overall Length 50mm \/ 2\"\u003c\/li\u003e\n\u003cli\u003eTwist Drill Bit Twist Drill Bit Total Length 58mm \/ 2.3\";Shank Diameter 2.5mm;Material HSS, Cobalt;Flute Length 25mm \/ 1\";Bit Diameter 2.5mm\u003c\/li\u003e\n\u003cli\u003ePackage Content 3 x Hand Tap,1 x Plastic Storage Case,10 x Twist Drill Bit\u003c\/li\u003e\n\u003cli\u003eStraight 3 flutes are ground to provide rapid chip removal for efficient threading.\u003c\/li\u003e\n\u003cli\u003eWider using range (rough processing, finishing, semi finishing), and comes with edge clear function, make processing products have better surface finish.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003eProduct Description\u003c\/h2\u003e\n\u003ch3\u003eSpecifications\u003c\/h3\u003e\n\u003cp\u003e(1)Hand TapMaterial : SKS2Color : Silver ToneThread Type : Bottoming ,TaperNumber of Flutes : 3Flute Diameter : M3(3mm)Flute Length(Approximately) : 20mm\/ 0.8\"Pitch Size : 0.5mmSquare End Size : 3 x 3mm \/ 0.12\" x 0.12\"(L*W)Shank Diameter : 4mm \/ 0.16\"Overall Length : 50mm \/ 2\"(2)Twist Drill BitTotal Length: 58mm \/ 2.3\"Shank Diameter: 2.5mmMaterial: HSS, CobaltFlute Length: 25mm \/ 1\"Bit Diameter: 2.5mmFeature: Straight ShankColor: Champagne Color\u003c\/p\u003e\n\u003ch3\u003ePackage Content\u003c\/h3\u003e\n\u003cp\u003e3 x Hand Tap10 x Twist Drill Bit1 x Plastic Storage Case\u003c\/p\u003e\n\u003ch3\u003eDescription\u003c\/h3\u003e\n\u003cp\u003eStraight threaded flute, suitable for hand machine where metric threads are specified.Straight 3 flutes are ground to provide rapid chip removal for efficient threading.Straight shank works in both keyed and key-less drill chucks.Wider using range (rough processing, finishing, semi finishing), and comes with edge clear function, make processing products have better surface finish.\u003c\/p\u003e\n\u003ch2\u003eSpecifications\u003c\/h2\u003e\n\u003ctable style=\"border-collapse:collapse;width:100%;max-width:600px;\"\u003e\n\u003ctr\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:8px;font-weight:bold;width:40%;\"\u003eItem Weight\u003c\/td\u003e\n\u003ctd style=\"border:1px solid #ddd;padding:8px;\"\u003e0.01 Ounces\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/table\u003e\n\u003c\/div\u003e","brand":"LinkMejor","offers":[{"title":"Default","offer_id":55034931642740,"sku":"B0BSPR6KX2","price":14.09,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1007\/5799\/5892\/files\/71LAcrHU0zL._SL1500_68d1c2fc-a02f-44d1-9653-a2997f562d8c.jpg?v=1785189841"},{"product_id":"6pcs-combination-drill-tap-bit-set-18-40-bsw-to-38-16-bsw-high-speed-steel-14-hex-shank-titanium-coated-screw-threading-drilling-tapping-tool-kit","title":"6pcs Combination Drill Tap Bit Set 1\/8-40 BSW to 3\/8-16 BSW High-Speed Steel 1\/4\" Hex Shank Titanium Coated Screw Threading Drilling Tapping Tool Kit","description":"\u003cdiv class=\"product-description\"\u003e\n\u003ch2\u003eKey Features\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003eCombination Drill and Tap Bit Thread size 1\/8-40 BSW, 5\/32-32 BSW, 3\/16-24 BSW, 1\/4-20 BSW, 5\/16-18 BSW, 3\/8-16 BSW. Can process both through holes and blind holes. Comes with a sturdy plastic box which is lightweight and durable, easy to store and organize.\u003c\/li\u003e\n\u003cli\u003e3-in-1 Combination The 3-in-1 combination drill and tap bit set can complete hole drilling, tapping, and countersinking. Three processes in one, one-step operation, greatly saving processing steps, improving work efficiency, and providing accurate processing results.\u003c\/li\u003e\n\u003cli\u003eSpecial Design Self-centering point, do not need assistant center drilling or center punching. Quick change 1\/4-inch hex shank can be used on power tools more easily and securely. A tapered end on hex shank can prevent excessive tapping. It exceeds the tap to prevent thread breakage from over-drilling.\u003c\/li\u003e\n\u003cli\u003e4341 High Speed Steel The high speed steel screw taps run at high speeds and generate threads quickly and efficiently, offering high hardness, wear resistance, and good toughness. Titanium coating provides excellent corrosion resistance, and reduces the coefficient of friction for smoother tapping.\u003c\/li\u003e\n\u003cli\u003eTips Works with drilling machines, tapping machines, CNC and milling machines. Use with tapping oil to get higher quality threads and more durable taps. Machine taps are suggested to be used with tap collets with overload protection. Recommended feed rate general steel 6-15m\/min; harder steel 5-10m\/min; stainless steel 2-7m\/min; cast iron 8-10m\/min.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003eProduct Description\u003c\/h2\u003e\n\u003cp\u003eHex Shank Size: 1\/4\"Thread Size: 1\/8-40 BSW, 5\/32-32 BSW, 3\/16-24 BSW, 1\/4-20 BSW, 5\/16-18 BSW, 3\/8-16 BSWDrilling + Tapping Length: 21mm \/ 0.83\", 22mm \/ 0.87\", 24mm \/ 0.94\", 24mm \/ 0.94\", 36mm \/ 1.4\", 36mm \/ 1.4\"1. The 3-in-1 combination drill and tap bit set can complete hole drilling, tapping, and countersinking. Three processes in one, one-step operation, greatly saving processing steps, improving work efficiency, and providing accurate processing results.2. Metric combination tap drill bit is used to create threaded holes, great for situations where both drilling and tapping are required. Can process both through holes and blind holes. Suitable for aluminum, mould steel, stainless steel, bronze, hard plastics.3. Self-centering point, do not need assistant center drilling or center punching. Quick change 1\/4-inch hex shank can be used on power tools more easily and securely. A tapered end on hex shank can prevent excessive tapping. It exceeds the tap to prevent thread breakage from over-drilling.4. 4341 high-speed steel screw taps run at high speeds and generate threads quickly and efficiently, offering high hardness, wear resistance, and good toughness. Titanium coating provides excellent corrosion resistance, and reduces the coefficient of friction for smoother tapping.5. Works with drilling machines, tapping machines, CNC, and milling machines. Use with tapping oil to get higher quality threads and more durable taps. Machine taps are suggested to be used with tap collets with overload protection.6. Tips: Recommended feed rate: general steel: 6-15m\/min; harder steel: 5-10m\/min; stainless steel: 2-7m\/min; cast iron: 8-10m\/min. The torque caused by too fast feed speed is too large, which can easily cause the tap to break. Taps are prone to chipping or breaking due to speed overload or non-vertical tapping.\u003c\/p\u003e\n\u003c\/div\u003e","brand":"LinkMejor","offers":[{"title":"Default Title","offer_id":55132245426548,"sku":"LCKJEN-B0DDT9JRL9","price":13.19,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1007\/5799\/5892\/files\/71ItQjdQlNL._SL1500.jpg?v=1786449343"},{"product_id":"13pcs-combination-drill-tap-bit-set-sae-6-32nc-to-14-20nc-metric-m3-to-m10-thread-taps-with-quick-change-adapter-titanium-coated-screw-threading-drilling-tapping-tool-kit","title":"13pcs Combination Drill Tap Bit Set, SAE 6-32NC to 1\/4-20NC Metric M3 to M10 Thread Taps with Quick Change Adapter, Titanium Coated Screw Threading Drilling Tapping Tool Kit","description":"\u003cdiv class=\"product-description\"\u003e\n\u003ch2\u003eKey Features\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003eCombination Drill and Tap Bit Thread size (SAE) 6-32NC 8-32NC 10-24NC 10-32NC 12-24NC 1\/4-20NC, (Metric) M3 x 0.5 M4 x 0.7 M5 x 0.8 M6 x 1.0 M8 x 1.25 M10 x 1.5. Can process both through holes and blind holes. Tap drill bit set includes a quick-change adapter for easy bit changes, and the sturdy plastic box is lightweight and durable for easy storage and organization.\u003c\/li\u003e\n\u003cli\u003e3-in-1 Combination The 3-in-1 combination drill and tap bit set can complete hole drilling, tapping, and countersinking. Three processes in one, one-step operation, greatly saving processing steps, improving work efficiency, and providing accurate processing results.\u003c\/li\u003e\n\u003cli\u003eSpecial Design Self-centering point, do not need assistant center drilling or center punching. Quick change 1\/4-inch hex shank can be used on power tools more easily and securely. A tapered end on hex shank can prevent excessive tapping. It exceeds the tap to prevent thread breakage from over-drilling.\u003c\/li\u003e\n\u003cli\u003e4341 High Speed Steel HSS4341 thread taps offer standard hardness, good wear resistance and heat resistance for general purpose threading applications, suitable for tapping softer materials or standard machining operations. Titanium coating provides excellent corrosion resistance, and reduces the coefficient of friction for smoother tapping.\u003c\/li\u003e\n\u003cli\u003eTips Works with drilling machines, tapping machines, CNC and milling machines. Use with tapping oil to get higher quality threads and more durable taps. Machine taps are suggested to be used with tap collets with overload protection. Recommended feed rate general steel 6-15m\/min; harder steel 5-10m\/min; stainless steel 2-7m\/min; cast iron 8-10m\/min.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003eProduct Description\u003c\/h2\u003e\n\u003cp\u003eAbout this item Combination Drill and Tap Bit: Thread size: (SAE) 6-32NC 8-32NC 10-24NC 10-32NC 12-24NC 1\/4-20NC, (Metric) M3 x 0.5 M4 x 0.7 M5 x 0.8 M6 x 1.0 M8 x 1.25 M10 x 1.5. Can process both through holes and blind holes. Tap drill bit set includes a quick-change adapter for easy bit changes, and the sturdy plastic box is lightweight and durable for easy storage and organization. 3-in-1 Combination: The 3-in-1 combination drill and tap bit set can complete hole drilling, tapping, and countersinking. Three processes in one, one-step operation, greatly saving processing steps, improving work efficiency, and providing accurate processing results. Special Design: Self-centering point, do not need assistant center drilling or center punching. Quick change 1\/4-inch hex shank can be used on power tools more easily and securely. A tapered end on hex shank can prevent excessive tapping. It exceeds the tap to prevent thread breakage from over-drilling. 4341 High Speed Steel: HSS4341 thread taps offer standard hardness, good wear resistance and heat resistance for general purpose threading applications, suitable for tapping softer materials or standard machining operations. Titanium coating provides excellent corrosion resistance, and reduces the coefficient of friction for smoother tapping. Tips: Works with drilling machines, tapping machines, CNC and milling machines. Use with tapping oil to get higher quality threads and more durable taps. Machine taps are suggested to be used with tap collets with overload protection. Recommended feed rate: general steel: 6-15m\/min; harder steel: 5-10m\/min; stainless steel: 2-7m\/min; cast iron: 8-10m\/min. › See more product details\u003c\/p\u003e\n\u003c\/div\u003e","brand":"LinkMejor","offers":[{"title":"Default Title","offer_id":55132245688692,"sku":"LCKJEN-B0DDTGQGY8","price":19.19,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1007\/5799\/5892\/files\/71qKFg5U5pL._SL1500.jpg?v=1786449356"},{"product_id":"6pcs-combination-drill-tap-bit-set-18-40-bsw-to-38-16-bsw-high-speed-steel-14-hex-shank-titanium-coated-screw-threading-drilling-tapping-tool-kit-pack-of-2","title":"6pcs Combination Drill Tap Bit Set 1\/8-40 BSW to 3\/8-16 BSW High-Speed Steel 1\/4\" Hex Shank Titanium Coated Screw Threading Drilling Tapping Tool Kit (Pack of 2)","description":"\u003cdiv class=\"product-description\"\u003e\n\u003ch2\u003eKey Features\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003eThe information below is per-pack only\u003c\/li\u003e\n\u003cli\u003eCombination Drill and Tap Bit Thread size 1\/8-40 BSW, 5\/32-32 BSW, 3\/16-24 BSW, 1\/4-20 BSW, 5\/16-18 BSW, 3\/8-16 BSW. Can process both through holes and blind holes. Comes with a sturdy plastic box which is lightweight and durable, easy to store and organize.\u003c\/li\u003e\n\u003cli\u003e3-in-1 Combination The 3-in-1 combination drill and tap bit set can complete hole drilling, tapping, and countersinking. Three processes in one, one-step operation, greatly saving processing steps, improving work efficiency, and providing accurate processing results.\u003c\/li\u003e\n\u003cli\u003eSpecial Design Self-centering point, do not need assistant center drilling or center punching. Quick change 1\/4-inch hex shank can be used on power tools more easily and securely. A tapered end on hex shank can prevent excessive tapping. It exceeds the tap to prevent thread breakage from over-drilling.\u003c\/li\u003e\n\u003cli\u003e4341 High Speed Steel The high speed steel screw taps run at high speeds and generate threads quickly and efficiently, offering high hardness, wear resistance, and good toughness. Titanium coating provides excellent corrosion resistance, and reduces the coefficient of friction for smoother tapping.\u003c\/li\u003e\n\u003cli\u003eTips Works with drilling machines, tapping machines, CNC and milling machines. Use with tapping oil to get higher quality threads and more durable taps. Machine taps are suggested to be used with tap collets with overload protection. Recommended feed rate general steel 6-15m\/min; harder steel 5-10m\/min; stainless steel 2-7m\/min; cast iron 8-10m\/min.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003eProduct Description\u003c\/h2\u003e\n\u003cp\u003eHex Shank Size: 1\/4\"Thread Size: 1\/8-40 BSW, 5\/32-32 BSW, 3\/16-24 BSW, 1\/4-20 BSW, 5\/16-18 BSW, 3\/8-16 BSWDrilling + Tapping Length: 21mm \/ 0.83\", 22mm \/ 0.87\", 24mm \/ 0.94\", 24mm \/ 0.94\", 36mm \/ 1.4\", 36mm \/ 1.4\"1. The 3-in-1 combination drill and tap bit set can complete hole drilling, tapping, and countersinking. Three processes in one, one-step operation, greatly saving processing steps, improving work efficiency, and providing accurate processing results.2. Metric combination tap drill bit is used to create threaded holes, great for situations where both drilling and tapping are required. Can process both through holes and blind holes. Suitable for aluminum, mould steel, stainless steel, bronze, hard plastics.3. Self-centering point, do not need assistant center drilling or center punching. Quick change 1\/4-inch hex shank can be used on power tools more easily and securely. A tapered end on hex shank can prevent excessive tapping. It exceeds the tap to prevent thread breakage from over-drilling.4. 4341 high-speed steel screw taps run at high speeds and generate threads quickly and efficiently, offering high hardness, wear resistance, and good toughness. Titanium coating provides excellent corrosion resistance, and reduces the coefficient of friction for smoother tapping.5. Works with drilling machines, tapping machines, CNC, and milling machines. Use with tapping oil to get higher quality threads and more durable taps. Machine taps are suggested to be used with tap collets with overload protection.6. Tips: Recommended feed rate: general steel: 6-15m\/min; harder steel: 5-10m\/min; stainless steel: 2-7m\/min; cast iron: 8-10m\/min. The torque caused by too fast feed speed is too large, which can easily cause the tap to break. Taps are prone to chipping or breaking due to speed overload or non-vertical tapping.\u003c\/p\u003e\n\u003c\/div\u003e","brand":"LinkMejor","offers":[{"title":"Default Title","offer_id":55140118331764,"sku":"LCKJEN-B0GGDK8YH5","price":25.98,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1007\/5799\/5892\/files\/81ZSyfrTVZL._SL1500_f35856eb-b6de-44eb-aeaa-8550422b8f0c.jpg?v=1786524478"}],"url":"https:\/\/linkmejor.com\/collections\/industrial-and-scientific-cutting-tools-threading-taps-combination-drill-and-taps.oembed","provider":"linkmejor.com - More for Less","version":"1.0","type":"link"}